New Research In
Physical Sciences
Social Sciences
Featured Portals
Articles by Topic
Biological Sciences
Featured Portals
Articles by Topic
 Agricultural Sciences
 Anthropology
 Applied Biological Sciences
 Biochemistry
 Biophysics and Computational Biology
 Cell Biology
 Developmental Biology
 Ecology
 Environmental Sciences
 Evolution
 Genetics
 Immunology and Inflammation
 Medical Sciences
 Microbiology
 Neuroscience
 Pharmacology
 Physiology
 Plant Biology
 Population Biology
 Psychological and Cognitive Sciences
 Sustainability Science
 Systems Biology
Prediction of the structure of symmetrical protein assemblies

Edited by Axel T. Brunger, Stanford University, Stanford, CA, and approved September 13, 2007 (received for review March 21, 2007)
Abstract
Biological supramolecular systems are commonly built up by the selfassembly of identical protein subunits to produce symmetrical oligomers with cyclical, icosahedral, or helical symmetry that play roles in processes ranging from allosteric control and molecular transport to motor action. The large size of these systems often makes them difficult to structurally characterize using experimental techniques. We have developed a computational protocol to predict the structure of symmetrical protein assemblies based on the structure of a single subunit. The method carries out simultaneous optimization of backbone, side chain, and rigidbody degrees of freedom, while restricting the search space to symmetrical conformations. Using this protocol, we can reconstruct, starting from the structure of a single subunit, the structure of cyclic oligomers and the icosahedral virus capsid of satellite panicum virus using a rigid backbone approximation. We predict the oligomeric state of EscJ from the type III secretion system both in its proposed cyclical and crystallized helical form. Finally, we show that the method can recapitulate the structure of an amyloidlike fibril formed by the peptide NNQQNY from the yeast prion protein Sup35 starting from the amino acid sequence alone and searching the complete space of backbone, side chain, and rigidbody degrees of freedom.
Symmetry is a recurrent theme in nature, from macroscopic objects like animals and plants to microscopic protein assemblies. A number of different point group and helical symmetries are found in naturally occurring protein assemblies (1). The most common type of symmetry is cyclic (C_{n} symmetry) where the oligomeric structure can be described by a rotation around a single rotation axis of one subunit. Cyclic symmetry generates ring structures found in pores, chambers and molecular motors generating rotational motion. Another common pointgroup symmetry is the dihedral group (D_{n} symmetry), which combines one rotational symmetry axis with perpendicular axes of twofold symmetry. D_{2} symmetry is particularly suited for allosteric control because it involves extensive contact surfaces between subunits (1). Icosahedral symmetry produces roughly spherical assemblies that are often used for storage and transport, as in virus capsids (1). Helical symmetries are produced by rotation and translation along a single symmetry axis and have been observed in microtubules, flagella and actin filaments (1). Amyloid fibers displaying helical symmetry are associated with a number of diseases, such as Creutzfeldt–Jacob's disease and Alzheimer's disease, and are formed by a large number of proteins (2).
The size of larger symmetrical assemblies can make it challenging to obtain highresolution structures of these biologically important systems. Molecular modeling provides an attractive route to studying symmetrical protein assemblies to provide structural models and answer mechanistic questions. By enforcing symmetry the number of degrees of freedom can be reduced, making calculations on otherwise quite large systems tractable. To date, there have only been a few attempts to predict the structure of larger protein assemblies. Eisenstein et al. (3) assembled the helical protein coat of tobacco mosaic virus by starting from a set of docked dimers. A similar approach was later used to dock structures with C_{n} and D_{n} symmetry (4, 5). Comeau and Camacho (6) developed a protocol to predict symmetry type (C_{n} and D_{n} symmetry) and the structure of oligomers given an oligomerization state by assembling sets of docked dimers into alternative symmetric assemblies. SchneidmanDuhovny et al. (7) developed a protocol for prediction of cyclic symmetry and Huang and Mayo (8) implemented a method for docking of C_{2} dimers for use in protein design. In these methods, the side chain and backbone degrees were not sampled.
In this work, we present a general computational framework for prediction of the structure of symmetrical protein assemblies implemented in the computer program ROSETTA (9). Symmetry is imposed in backbone, side chain, and rigid body degrees of freedom. The conformational search space is reduced by sampling only symmetric degrees of freedom and the sizes of the systems are effectively limited by only explicitly simulating a subset of the interacting monomers. Using this method, we can accurately predict the structure of protein assemblies with cyclic, helical, and icosahedral symmetries from the structure of a single subunit while keeping the backbone torsion angles fixed, and recapitulate the structure of an amyloidlike fibril formed by the peptide NNQQNY from the yeast prion protein Sup35 (10) starting from amino acid sequence alone by searching the complete set of backbone, side chain, and rigid body degrees of freedom.
Results
Overview of Method.
We implemented a protocol for modeling of symmetrical protein assemblies within the computer program ROSETTA (9). In this work, we keep bond lengths and bond angles fixed, and assume perfect symmetry of the subunits, and hence the degrees of freedom are the backbone and side chain torsion angles of a single subunit and the parameters describing the rigid body transforms relating the subunits. The simulation starts from a random symmetrical configuration. The conformational search process is divided into low and highresolution phases. In the lowresolution search, the backbone and rigidbody degrees of freedom are optimized by using a reduced representation of the complex in which each amino acid in the protein is described by the position of the four backbone heavyatoms and a single “pseudoatom” representing the side chain (referred to as a centroid).
In the more timeintensive, highresolution search, side chains are added to each protein copy using a Monte Carlo simulated annealing algorithm together with a backbonedependent rotamer library (11). Then the backbone, side chain, and rigid body degrees of freedom are simultaneously optimized by using a Monte Carloplusminimization (MCM) protocol in which each move consists of three steps: (i) random perturbation of the rigidbody and backbone degrees of freedom; (ii) optimization of side chain conformations by either full combinatorial repacking or by cycling through alternative rotamers for each side chain in a randomized order and selecting the lowest energy conformation (referred to as rotamer trials); and (iii) gradientbased minimization of the backbone, side chain, and rigid body degrees of freedom. Moves are accepted or rejected according to the standard Metropolis criterion; typical simulations involve ≈100 MCM attempted moves. The lowestenergy structures produced in a large number of independent trajectories are clustered and the lowestenergy member of the largest cluster is chosen. Typically, the global search is followed by a local search where the free energy landscape is further explored in the vicinity of the conformational space of the lowest energy models.
Implementation of Symmetry.
A symmetrical system is unchanged under a symmetry transformation. These transformations can be rotation, translation, inversion, and mirror operations. Due to the chiral nature of amino acids, oligomeric proteins exhibit only rotational and translational symmetry. Given the coordinates of a single subunit together with a set of symmetry transformations consistent with the desired symmetry, the position of all subunits in an oligomer can be computed. This simple description of a symmetric system leads to difficulties in gradient computations (see below). To avoid these difficulties, we take advantage of a recently implemented a general kinematic framework for optimization of molecular systems with rigidbody and torsional degrees of freedom (12). We extended this treebased framework to support symmetric systems by including in the molecular description a set of local reference frames, one frame associated with each subunit.
These local reference frames are related by symmetry transforms (which may vary during the simulation); additional rigidbody transforms link each subunit to its associated reference frame. The latter transforms are identical for all subunits; equivalently, each subunit has identical coordinates when viewed in its associated reference frame. For example, in a cyclic system each reference coordinate system can be chosen with the z axis along the rotation axis, the x axis pointing toward the rotation parallel to the axis, and with y perpendicular to the plane spanned by x and z. A translation along x in one reference system will preserve symmetry if an identical translation is applied to the other subunits. In this representation, it is straightforward to preserve symmetry during gradientbased minimization and rigidbody perturbations. In addition, the partial derivative of the energy function with respect to a symmetric degree of freedom (rigidbody or torsional) can be calculated by multiplying the corresponding derivative for a single subunit by a factor of n _{s}, where n _{s} is the number of subunits in the system. As an example, consider the partial derivative of the energy E of a cyclic system with respect to the symmetric xcoordinate introduced above where ∇E is the gradient of the full (nonsymmetric) system and x̂_{i} is the unit vector corresponding to translation of subunit i along the x axis of its local frame.
Symmetry of side chain degrees of freedom is implemented by modification of the combinatorial packing (described in ref. 13) and rotamer trials algorithms. Insertions of rotamers are symmetrized, leading to the insertion of identical rotamers at all symmetryrelated positions and the energy of insertion is evaluated for all positions at once.
Cyclic Symmetry.
A cyclic system has four rigid body degrees of freedom; the subunits have three rotational and a translational degree of freedom (the radius). For larger oligomers the system can be fully described by a smaller subsystem. Systems with more than three subunits are simulated with three subunits to avoid edge effects. The global search starts with random orientations of the subunits, which are brought into contact by a symmetric translation toward the nfold rotation axis. A total of 3 × 10^{3} independent models are typically generated in the global search, which is followed by a local refinement (generating ≈1 × 10^{3} models) to explore the local energy landscape. In the test calculations described here, the backbone torsion angles were kept fixed and the search was done over the side chain and rigidbody degrees of freedom.
We tested the symmetrical assembly protocol on a range of randomly selected symmetrical oligomers from the Protein Data Bank (14) containing noncrystallographic symmetry. The set includes a homodimer (dihydrofolate; ref. 15), two trimers [acyl carrier protein (16) and Chorismate mutase (17)], one pentamer (lumizine synthetase; ref. 18), one heptamer (archael sm protein; ref. 19) and an oligomer with unknown oligomerization state from the type III secretion system. These experimental structures do not obey strict symmetry (the backbone rmsd between subunits in the oligomers range between 0.2 and 1.0 Å) but deviations are relatively small, with rotation angles between subunits differing 0.2–4.9% relative to the values expected for perfect symmetry.
Plots of energy vs. root mean square deviation (rmsd, calculated over all common C ^{α} for the simulated subsystem) relative to the native structure for the models generated in the global search are shown in Fig. 1, and lowest energy models after further refinement are compared with the native structures in Fig. 2. The result for the pentameric structure of lumizine synthetase (1ejb) serves as a representative of the results obtained for all of the systems. The global search (Fig. 1 Left) produced models with a large spread in energy and rmsd and with a significant fraction of models with low backbone rmsd relative to the native structure. The lowestenergy model was subjected to a local refinement, in which the rigid body orientation is randomly perturbed around the starting conformation and the MCM protocol is repeated to sample the local energy landscape (Fig. 1 Right). The energy funnel is steep and narrow, with a width of ≈3 Å. The lowest energy model is 0.3 Å away from the experimentally determined structure (Fig. 2) calculated over the full oligomer. A detailed analysis of the binding interface of the best scoring model shows that the side chain conformations for a large fraction of residues are correctly predicted. The fraction of interface residues with nativelike side chain conformations is 71% for this model (Fig. 3). The results for the other studied systems are very similar to the results for lumizine synthetase and are summarized in Table 1.
Modeling of the Type III Secretion System (TTSS) Component EscJ.
The docking protocol was also used to predict the structure of a component of the TTSS. TTSSs are multicomponent macromolecules found in many Gramnegative pathogens that mediate secretion and translocation of bacterial proteins into the cytoplasm of eukaryotic cells (20, 21). The core of the TTSSs has been shown by electron microscopy to resemble a needle and is referred to as the needle complex. At the base of the needle several proteins form ringshaped structures. The structure of one of these base proteins, EscJ from enteropathogenic Escherichia coli, has been solved (22). In the crystal unit cell, protein subunits form a supramolecular helix. Biochemical and electron microscopy data have indicated that EscJ forms a 22 ± 1.7 monomer ring in the biological setting. By projecting the helix onto a plane, a model of the circular form of EscJ could be constructed (with 24 subunits in the ring) (22).
We used the symmetrical docking protocol to predict the structure of the cyclical form of EscJ from the crystal structure of EscJ. The structure of the ring was simulated with oligomerization states ranging from 21 to 25 monomers. Lower energy models were found for each case. The 24 membered ring, having lowest energy, was chosen for further studies. The energy vs. rmsd plots display a sharp energy funnel with a large drop in energy relative to the crystallized form of the protein (Fig. 1). The similarity of the lowest energy model (Fig. 2) with the crystal structure (0.9 Å calculated over three subunits) suggests that the model is a reasonable representation of the cyclical form of EscJ.
Helical Symmetry.
Helical systems have six rigid body degrees of freedom. The subunits have three rotational degrees of freedom and a translational degree of freedom, which is the distance from the center of a subunit to the nfold rotation axis (the radius); one degree of freedom specifies the rotation angle between subunits (α) and the pitch of the helix is set by the sixth degree of freedom. The pitch can have both positive and negative values corresponding to right or lefthanded helices and is constrained because neighbors along the helix axis cannot clash, although they are free to interact. In the models, we assume that the interactions between consecutive subunits are the primary driving force for helix formation and focus on these interactions to reduce the computational complexity. Three consecutive monomers were used to model the system. In the test calculations described here we kept the backbone torsion angles fixed and the search was done over the side chain and rigid body degrees of freedom.
We tested the method by attempting to reproduce the helical form of EscJ in the crystal structure starting with a single monomer. All degrees of freedom were fully randomized except α, which was initialized in the range corresponding to 20–26 monomers per helix turn (which is consistent with experimental information; ref. 22) but is allowed to move outside this range during the simulation. The global search produces a handful of lower energy models. All of these have a pitch corresponding to a lefthanded helix except the lowest energy model, which is close to 0 (0.8 Å). This model was subjected to multiple independent refinement calculations followed by filtering to pick out models without lateral clashes. The lowest energy model after this procedure has an rmsd versus the crystal form over three subunits of 0.7 Å (Table 1). The pitch is −2.6 Å, close to the experimental values of −2.8 Å, and the handedness is correctly predicted. The rotation angle between subunits is 13.3° in the model compared with 15° for the crystal form. A reconstruction of the helix can be seen in Fig. 4.
Icosahedral Symmetry.
Icosahedra contain 20 triangular faces and two, three, and fivefold symmetry axes. The icosahedral symmetries of virus capsids are classified by a triangulation number. The simplest icosahedral viruses have a triangulation number of 1 (T1), where all subunits have identical interactions with neighboring subunits. Each of the 20 triangular faces of T1 viruses consists of three subunits resulting in a macromolecule with 60 subunits. The icosahedral system has six degrees of freedom. These correspond to three rotational degrees of freedom for the subunit, a translational degree of freedom normal to the triangular face that determines the size of the icosahedron, a translational degree of freedom corresponding to the distance from the subunit to the threefold symmetry axis (a radius), and rotational degree of freedom that rotates the threefold symmetryrelated partners around their threefold axis. The two last degrees of freedom are used to define the position of the subunits on the face of the polyhedron.
By carrying out searches over all six rigidbody degrees of freedom and the side chain degrees of freedom as in the previous examples we attempt to reconstruct the T1 virus capsid of Satellite panicum mosaic virus from the structure of its subunit capsid protein (23). A subsystem of six subunits was simulated to avoid edge effects, so that one subunit is completely encapsulated by neighboring interfaces. Before entering the highresolution phase, models are filtered based on the number of intersubunit contacts, which removes ≈25% of the population. In the energy vs. rmsd plot for the global search an energy funnel can be distinguished (Fig. 1). The lowest energy model is 2.4 Å away from the native structure calculated over six subunits. After the local refinement, the lowest energy model is 2.1 Å away from the native structure (Fig. 2). Sixtyeight percent of the interface residues in this model are correctly predicted. The refinement process produces a number of models with lower rmsd values, but these have slightly higher energies. The lowest rmsd model is only 0.7 Å away from the native structure, but has significantly higher energy. The full model of the reconstructed virus can be seen in Fig. 4.
Modeling an AmyloidLike Fibril.
The recent highresolution structure of a microcrystal formed by the peptide NNQQNY from the yeast prion protein Sup35 has been proposed as a model for the crossbeta core of amyloid fibrils (10). In this structure, a single copy of the sixresidue peptide is replicated by a twofold screw symmetry to form two parallel βsheets that pack tightly together to form a dry interface described as a steric zipper. A distinctive feature of this steric zipper is that it is formed by polar side chains, asparagine and glutamine, which satisfy their hydrogenbonding requirements by forming stacks of hydrogen bonds parallel to the fibril (symmetry) axis. We set out to recapitulate the structure of this steric zipper using knowledge of the symmetry type and of the presence of backbone hydrogen bonds parallel to the fibril axis (the crossbeta structure, a well established characteristic of amyloid fibrils; ref. 2). The degrees of freedom in this system are the peptide backbone and side chain torsion angles and five rigidbody degrees of freedom (three rotations of the peptide, distance from the peptide to the symmetry axis, and rise along the axis between peptides). Details on the simulation are given in Materials and Methods; briefly, a lowresolution model is built by choosing a random starting orientation for the peptide and sampling backbone torsion angles by fragment insertion. This model is refined by a highresolution, allatom simulation in which all degrees of freedom (Fig. 5 a) are simultaneously optimized. A plot of energyvs.rmsd for a fivepeptide slice of the system is shown in Fig. 5 d; in Fig. 5 b and c, the lowestenergy model is superimposed on the native structure (0.59 Å C^{α} rmsd, 0.70 Å over the core side chains). This figure illustrates that we are, starting only from the sequence of the peptide, able to recapitulate the steric zipper to high resolution, suggesting that computational modeling may be a powerful complement to experimental techniques in elucidating the structures of other amyloidlike systems.
Discussion
We have developed a method to predict the structure of symmetrical protein assemblies. The method uses simultaneous optimization of backbone, side chain, and rigid body degrees of freedom in which the search space is restricted to symmetrical conformations. The computational complexity is further reduced by simulating only smaller subsystems of the symmetrical assembly. The method has been applied to systems with cyclical, helical, and icosahedral symmetry but is not restricted to these systems and can be extended to model any type of symmetrical system where all subunits are chemically equivalent. The results show that highly accurate models can be produced with this protocol.
Our approach assumes symmetrical arrangements of protein subunits. With a few notable exceptions, homooligomers assemble into symmetrical arrangements despite the fact that there are vastly greater nonsymmetrical possibilities. Symmetry breaking, when present, is usually fairly local. Asymmetry in side chain conformations is sometimes found close to a symmetry axis where for example efficient hydrogen bond formation requires local symmetry breaking (as is the case for leucine zippers; ref. 24). Symmetry breaking is also well established in larger virus capsids (1). As there is usually considerable symmetry present even when there is local symmetry breaking, a reasonable general approach would be to fully constrain symmetry during initial model generation to reduce the size of the space being sampled, and then allow local symmetry breaking, for example by eliminating the symmetrization of the side chain conformations, in later refinement steps. In most of the calculations we have assumed knowledge of the oligomerization state of the system. This information can often be experimentally determined but may also be inferred from simulations with different oligomerization states, as shown in ref. 6.
Comparison with Previous Methods.
Several groups have developed methods to predict the structure of symmetrical protein assemblies using threedimensional gridbased fast Fourier transform (FFT) docking, a method which optimizes the shape complementarity between binding partners, to produce dimeric complexes. Top scoring dimer orientations are then used to assemble the full symmetrical system, which is scored using an energy function (3–6). SchneidmanDuhovny et al. (7) developed a different method that use a sparse representation of the molecular surface and geometrical hashing techniques to predict C_{n} symmetries. All these methods have been successful in predicting C_{n} and D_{n} symmetries in bound–bound docking experiments. Our approach has the advantage that arbitrary symmetries can be modeled, both side chain and backbone flexibility can be explicitly modeled, and that all degrees of freedom in the oligomeric system are simultaneously optimized. The main disadvantage of our method is the high computational cost associated with highresolution modeling.
Backbone Flexibility.
In general, backbone conformational changes are expected in real world applications of our symmetrical modeling protocol, either because the starting structure is a comparative model or to allow for conformational change upon oligomerization. Thus, the examples in this paper that utilizes crystal structures coordinates must be viewed as “best case” scenarios. The use of lowresolution experimental data as constraints in the simulations can drastically reduce the conformational search space and compensate for the computational cost associated with full backbone flexibility. These constraints can come from various sources, e.g., alanine scanning (25), chemical crosslinking (26), and hydrogendeuterium exchange (27) coupled with mass spectrometry. Perhaps the most useful type of intermediate to lowresolution data are provided by cryoelectron microscopy, which is often used to structurally characterize large multiprotein assemblies (28). Although, in the general case, cryoEM or other lowresolution data will be highly desirable for building confident models using the methods described in this paper, the striking recapitulation of the crystal structure of the amyloid fiber forming peptide illustrates that, in systems with relatively few degrees of freedom, accurate models can be built from sequence information alone.
Materials and Methods
The symmetrical modeling protocol was implemented in ROSETTA and combines new methods for the treatment of symmetry with methods previously developed for proteinprotein docking (29, 30) and ab initio protein structure prediction (31). ROSETTA uses real space MonteCarlo Minimization to find the lowest energy conformation of binding partners. The protocol consists of a lowresolution search protocol where the side chains are represented by a centroid pseudoatom placed at the average position found in a representative set of structures from the Protein Data Bank. The lowresolution energy function uses residuescale interaction potential derived from the analysis of highresolution protein structures (29, 32, 33). In a subsequent highresolution stage, the energy is calculated by using an allatom energy function dominated by a Lennard–Jones potential, an orientationdependent hydrogen bond potential, and an implicit solvation model (11). The time to generate a single model ranged from 3 to 13 min on a 1.6MHz Athlon AMD processor with 1 Gb of memory.
Symmetrical Placement of Subunits.
The protocol starts with a randomization of the rotational degrees of freedom of one subunit. The first subunit is placed in its local coordinate frame. The coordinate frames of the other subunits are constructed by symmetry transformation of the first subunit's coordinate frame within a static coordinate frame. The other subunits are placed within their coordinate frame with the same internal coordinates as the first subunit. The exact details of this process depend on the symmetry of the system.
For cyclic symmetry the origin of the first coordinate frame is placed at a certain distance (equal to the radius) along the x axis in the static frame with the x axis of the coordinate frame pointing toward the origin of the static frame and the z axis of the first coordinate frame parallel to nfold rotation axis. The coordinate frames for the other subunits are created by n − 1 rotations around the z axes of the static frame. The first step of the lowresolution search is a “slide into contact,” where the subunits are translated along the x axes of their coordinate frames until they meet in glancing contact. For systems with more than three subunits, three adjacent subunits are chosen and only the energy for the central subunit is calculated to avoid edge effects.
For helical symmetry, the first coordinate frame is placed as described in previous paragraph and the origins of the other coordinate frames are constructed by a rotation of α degrees (where 360/α is the number of subunits per turn) around and translation p (equal to the pitch of the helix) along the z axis of the static coordinate frame. At the start of the simulation α and p are randomized in the range 13.8–18° (corresponding to 20–26 subunits per turn) and 0.5–60 or 0.5(60) Å, respectively. Subunits are “slideintocontact” as in the cyclical case but with the addition that an adjustment of p may be necessary in some cases to get a contact. To make it computationally tractable, a system of three adjacent subunits is chosen where only the central subunit is scored to avoid edge effects. For the energy refinement step an extension of the “slideincontact” method was also used where an additional “slideincontact” performed by reducing α from a larger value until contact occurs.
The fibril model has a twofold screw symmetry. The reference coordinate systems are chosen to lie along the symmetry axis, with z axes parallel to the symmetry axis and a 180° rotation about the z axis from one coordinate system to the next. The lowresolution simulation begins with the choice of a random starting configuration. To guarantee that backbone hydrogen bonds are present along the fibril axis, we choose at the start of each simulation a parallel βstrand pairing at random from a protein of known structure. The geometry of this pairing is used to determine the i → i + 2 rigid body transformation between subunits (subunits i and i + 1 are on opposite sides of the symmetry axis; backbone hydrogen bonds are present between subunits i and i + 2). The two remaining rigid body degrees of freedom (distance from the subunit to the symmetry axis, and internal rotation of the subunit about its z axis) are chosen randomly from suitable uniform distributions. Backbone torsion angles are initialized to extended values and a lowresolution fragment insertion simulation is used to build a backbone compatible with the starting rigidbody configuration. The resulting lowresolution model is further refined by an allatom simulation as described above, with the added feature that backbone torsionangle moves are included, and all degrees of freedom of the system (rigidbody, backbone, and side chain) are minimized simultaneously.
An icosahedron contains 12 vertices and 20 triangular faces. For a T1 symmetrical system, each face contains three subunits coupled by a threefold symmetry axis. In the icosahedral setup, the vertices are created at s*(0,±1, ±φ), s*(±1, ±φ,0), s*(±φ,0,±1) where s controls the size of the icosahedron and φ = (1+√5)/2 is the golden ratio. Reference frames are placed at the center of each face with the z axis normal to the face, the x axis pointing toward one vertex describing the triangular face, and the y axis perpendicular to x and z axis. The origin of the coordinate frames of the first subunit of a face is placed along the x axis of the reference frames (the distance to the center is the radius). In the coordinate frames of the first subunits of the faces, the x axis points to the center of the face and the z axis is parallel to the z axis of the reference frame. The coordinate frames of the two other subunits in a face are constructed by 120° rotations of the first coordinate frame around the z axis of the reference frame. At the start of the simulation the size of the icosahedron (s), which is controlled by a translation along the z axes of reference frames, and the radius is set to a large values so that different subunits do no contact each other. The first step of the lowresolution search is a “slideintocontact” where the subunits are translated along the x axes of their coordinate frames followed by a second slideintocontact where the size of the icosahedron is reduced by sliding along the z axis of the reference frame. The subunits are initially placed on lines from the vertices to the center of the faces. Then all of the subunits related by threefold symmetry are rotated together around the z axis of the reference frame by a random angle in the range ±30°. A reduced system of six subunits is used to simulate the icosahedral symmetry corresponding to the three subunits related by a threefold axis together with three subunits from two other faces. Only the subunit that is surrounded by the largest number of neighboring subunits is chosen for scoring to avoid edge effects.
Symmetrization of Side Chain Degrees of Freedom.
Rosetta uses two side chain rotamer optimization methods: simulated annealing (“packing”) (11) and greedy one at a time optimization (“rotamer trials”). Packing or rotamer trials are used for side chain optimization within MCM after the random pertubation but before the gradientbased minimization. Packing is used instead of rotamer trials every eight cycles of MCM. Both the packing algorithm (13) and rotamer trials were modified to allow for symmetrical rotamer placement.
Software.
All figures were made with gnuplot and pymol (DeLano Scientific). The rosetta source code is available without charge for academic users from http://depts.washington.edu/ventures/UW_Technology/Express_Licenses/Rosetta.
Acknowledgments
We thank Ora SchuelerFurman for stimulating conversations about the origin of symmetry and Keith Laidig for flawless maintenance of computer resources and Sam Miller and Natalie Strynadka for introducing us to the type III secretion system. This work was supported by a National Institutes of Health grant. A postdoctoral fellowship to I.A. from the Knut and Alice Wallenberg foundation is gratefully acknowledged.
Footnotes
 ^{§}To whom correspondence should be addressed. Email: dabaker{at}u.washington.edu

Author contributions: I.A. and P.B. contributed equally to this work; I.A., P.B., and D.B. designed research; I.A. and P.B. performed research; C.W. contributed new reagents/analytic tools; I.A. and P.B. analyzed data; and I.A., P.B., and D.B. wrote the paper.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.
 Abbreviation:
 MCM,
 Monte Carlo plus minimization.
 © 2007 by The National Academy of Sciences of the USA
References
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵

↵
 Kuhlman B ,
 Baker D
 ↵

↵
 Thompson MJ ,
 Sievers SA ,
 Karanicolas J ,
 Ivanova MI ,
 Baker D ,
 Eisenberg D
 ↵
 ↵
 ↵
 ↵
 ↵

↵
 Mura C ,
 Cascio D ,
 Sawaya MR ,
 Eisenberg DS
 ↵
 ↵
 ↵
 ↵

↵
 O'Shea EK ,
 Klemm JD ,
 Kim PS ,
 Alber T
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵

↵
 Bradley P ,
 Misura KM ,
 Baker D
 ↵
 ↵
Citation Manager Formats
Sign up for Article Alerts
Jump to section
You May Also be Interested in
More Articles of This Classification
Biological Sciences
Biophysics
Related Content
 No related articles found.
Cited by...
 Structural model of the dimeric Parkinsons protein LRRK2 reveals a compact architecture involving distant interdomain contacts
 Mechanisms of Calmodulin Regulation of Different Isoforms of Kv7.4 K+ Channels
 A Structural Study of CESA1 Catalytic Domain of Arabidopsis Cellulose Synthesis Complex: Evidence for CESA Trimers
 Design of ordered twodimensional arrays mediated by noncovalent proteinprotein interfaces
 Computational design of a leucinerich repeat protein with a predefined geometry
 A Proposed Mechanism for the Promotion of Prion Conversion Involving a Strictly Conserved Tyrosine Residue in the {beta}2{alpha}2 Loop of PrPC
 Protein folding, structure prediction and design
 Modeling Protein Assemblies in the Proteome
 Tertiary model of a plant cellulose synthase
 The Molecular Basis of Ironinduced Oligomerization of Frataxin and the Role of the Ferroxidation Reaction in Oligomerization
 Protein Export According to Schedule: Architecture, Assembly, and Regulation of Type III Secretion Systems from Plant and AnimalPathogenic Bacteria
 Structure of the basal components of a bacterial transporter
 Selective disruption of high sensitivity heat activation but not capsaicin activation of TRPV1 channels by pore turret mutations
 Structural basis for gating charge movement in the voltage sensor of a sodium channel
 Malaria Parasite Actin Polymerization and Filament Structure
 Interactions of the Transmembrane Polymeric Rings of the Salmonella enterica Serovar Typhimurium Type III Secretion System
 Building Macromolecular Assemblies by Informationdriven Docking: INTRODUCING THE HADDOCK MULTIBODY DOCKING SERVER
 Integrative Structure Modeling of Macromolecular Assemblies from Proteomics Data
 Simultaneous prediction of protein folding and docking at high resolution