New Research In
Physical Sciences
Social Sciences
Featured Portals
Articles by Topic
Biological Sciences
Featured Portals
Articles by Topic
 Agricultural Sciences
 Anthropology
 Applied Biological Sciences
 Biochemistry
 Biophysics and Computational Biology
 Cell Biology
 Developmental Biology
 Ecology
 Environmental Sciences
 Evolution
 Genetics
 Immunology and Inflammation
 Medical Sciences
 Microbiology
 Neuroscience
 Pharmacology
 Physiology
 Plant Biology
 Population Biology
 Psychological and Cognitive Sciences
 Sustainability Science
 Systems Biology
Filter feeders and plankton increase particle encounter rates through flow regime control

Edited by David Karl, University of Hawaii, Honolulu, HI, and approved March 26, 2009 (received for review September 13, 2008)
Abstract
Collisions between particles or between particles and other objects are fundamental to many processes that we take for granted. They drive the functioning of aquatic ecosystems, the onset of rain and snow precipitation, and the manufacture of pharmaceuticals, powders and crystals. Here, I show that the traditional assumption that viscosity dominates these situations leads to consistent and largescale underestimation of encounter rates between particles and of deposition rates on surfaces. Numerical simulations reveal that the encounter rate is Reynolds number dependent and that encounter efficiencies are consistent with the sparse experimental data. This extension of aerosol theory has great implications for understanding of selection pressure on the physiology and ecology of organisms, for example filter feeders able to gather food at rates up to 5 times higher than expected. I provide evidence that filter feeders have been strongly selected to take advantage of this flow regime and show that both the predicted peak concentration and the steadystate concentrations of plankton during blooms are ≈33% of that predicted by the current models of particle encounter. Many ecological and industrial processes may be operating at substantially greater rates than currently assumed.
Filter feeding animals are ubiquitous in aquatic habitats, with dense benthic assemblages exerting major effects on marine ecosystems through their impact on plankton populations (1). By removing particulate food from the surrounding water, filter feeders act as mediators of carbon flux between the water column and the bottom (1–3). Characterized by the possession of an organ used to capture suspended particles from the water, filter feeders use a highly variable array of feeding structures that include appendages bearing hairs, mucus or silk nets, gill rakers and baleen plates, lophophores, tentacles, and ciliated and flagellated cells. However, within a feeding structure, individual collecting elements (the first point of contact for food particles) are surprisingly similar in morphology because of the limited number of hydrodynamic mechanisms responsible for the delivery of particles (4–6). These encounter mechanisms are identical to those responsible for the majority of solidfluid interactions in areas such as filtration, separation, chemical, and bioreactors, and atmospheric particulate dynamics.
Currently, understanding of particle encounter mechanisms is limited to 2 simplified flow regimes: In low Reynolds number (Re) flows the effects of inertia are ignored, whereas in high Reynolds number flows effects of viscosity are neglected (Re = ρUl/μ, where U is velocity, l is a linear dimension and ρ and μ are the density and dynamic viscosity, respectively, of the fluid). At low Re streamlines are symmetrical around a symmetrical object, whereas at high Re they are more closely packed and asymmetrical (Fig. 1). Thus, at some transitional Re, streamlines begin to compress around the body, providing a potential mechanism for increased encounter of particles following those streamlines (6). Although there continues to be considerable focus on interactions at high and low Re (variously “aerosol,” “coagulation,” or “flocculation” theory) we know much less about the transitional regime, characterized by Reynolds numbers in the range 0.1–50, where inertial and viscous forces are approximately balanced (refs. 4, 7, and 8, but see ref. 9 for an experimental study). In stark contrast to this bias in study, many particle processes involve Reynolds numbers in this range [for example: filter feeding animals (4, 6, 10–16, 17) (Re ≥ 1); marine snow formation (18) (Re = 0.4–32); and for airborne pollen, spores and dust (19) (Re > 1)].
Here, I use a computational fluid dynamic (CFD) model to examine particlefluid, particleparticle and particlesolid interactions in the range 0.1 ≤ Re ≤ 50 (hereafter “intermediate Re”) where this transition occurs. Numerical approaches have proven invaluable in understanding more complex situations such as turbulent regimes, but are also useful for understanding the intermediate Re regime where analytical solutions become intractable. I show that, because of the compression of streamlines, encounter rates between particles, and between particles and structures, differ substantially from those predicted by low Re theory. I use the results to illustrate the importance of intermediate Re interactions to filter feeding animals and to flocculation driven by gravitational sedimentation (exemplified by coagulation of oceanic plankton).
Results
I constructed a finite element model for the simple case of an infinite cylindrical collector in an unbounded fluid (Fig. 2). This geometry represents a good approximation to both the foodcollecting elements of animals such as polychaetes or cnidarians with widely spaced tentacles and of isolated filter fibres. The numerical simulations reveal that λ (half the crossstreamline distance of fluid whose particles are effectively encountered by the cylinder) is a function of both the Reynolds number based on the cylinder diameter (Re_{c}) and the absolute particle radius (r_{p}). This differs from the majority of low Re formulations, which are Re independent (5, 6). If restricted to r_{p} ≤ 0.5 and Re_{c} ≤ 10, λ estimated from the numerical simulations can be approximated to within 6.1% (0.1% for Re_{c} ≤ 0.1) by where Given λ, the rate of encounter between particles in the flow and the cylinder can be calculated as F_{R} = 2CUl_{c}λ, where C is the number concentration of particles in the fluid and l_{c} the length of the cylinder (Fig. 3). The dependency of encounter rate (F_{R}) on Re_{c} was derived from Eq. 1 for the intermediate Re regime: This indicates that, for an increasing Reynolds number, the particle encounter rate will increase faster than linearly with Re_{c} for 0.1 ≤ Re_{c} ≤ 10. However, it will increase only proportionally to Re_{c} at Re_{c} < 0.1. At the smallest (0.005) and largest (0.5) r_{p} values considered, increasing Re_{c} from 0.1 to 1 increases encounter rate by a factor of ≈16, while from Re_{c} 1 to Re_{c} 10 increases F_{R} by a factor of 25.6 to 28.8 (Fig. 3). Compared with Re = 0.1, at Re = 10 F_{R} can be 470 times higher when the effects of increased particle delivery (increased U) and streamline compression (increased Re) are considered. The effect of streamline compression alone is an increase in F_{R} by a factor of ≈1.7 for an increase in Re from 0.1 to 1, ≈2.8 for Re 1 to 10, and ≈4.7 for Re 0.1 to 10.
Encounter rate F_{R} was converted to encounter efficiency (ε, see Materials and Methods), to allow comparison with semianalytical derivations (20) for Re_{c} ≪ 0.1 and experimental data (9, see Fig. 4). The deviation from the low Re result of Fuchs (20) is more than likely due to his use of approximations to Lamb's flow (21). Despite these differences, the results support a consistent link between the high and lowRe formulations of Fuchs (20), and the fit with the experimental data of Palmer et al. (9) for cylindrical collectors is good, whereas the lowRe formulation predicts exponentially increasing efficiency for Re > 0.1. This latter prediction is an extrapolation of Fuchs's formula outside its range of validity and is an artifact of the formulation.
A similar process to that of filter feeding is the collision of sinking spheres, which is one mechanism within coagulation theory (22). The aggregation of particles in the ocean, driven by collisions between particles, is an important process for the transfer of material from the upper layers of the ocean to the seabed, and is thought to be a mechanism by which plankton blooms terminate (23, 24). To examine the effects of intermediate Re on these processes I generated numerical results for encounter rates between 2 spheres (Fig. 2C and Materials and Methods). The resulting “coagulation kernels” describe the volume of fluid swept by a sphere, allowing the estimation of encounters between 2 spherical particles (25). Because the aim was to highlight the differences between low and intermediate Re effects for particle coagulation, 2 other kernels [Brownian and shear collision (22)] were not included, leaving only the effects of differential sedimentation (where particles collide because of differential sinking rates). The formulation of the intermediate Re kernel indicates that the relationship is proportional to the absolute crosssectional area of the smaller particle. This relationship is similar to that for the commonly used curvilinear kernel, derived from the assumption of Stokes flow, whereas the less accurate rectilinear kernel is mostly dependent on the crosssectional area of the larger particle.
Incorporation of the new kernel into a model of coagulation in a plankton bloom in the ocean surface layers (23, 26) provides evidence for the importance of including intermediate Re interactions in such systems. As expected (23), in both cases, as cells divide, the singlecell concentrations increase exponentially with time, whereas the concentration of aggregates decreases slowly as they settle out of the system (Fig. 5). As the concentration of single cells increases, coagulation becomes more important, resulting in a rapid increase in larger particles at around day 11 in the curvilinear case (Fig. 5). The intermediate Re case, however, experiences a much slower increase in singlecell concentrations, because collisions occur at a greater rate using the intermediate Re kernel (Fig. 5 and Fig. S1). Coagulation rates are higher in the intermediate Re case, leading to more rapid sedimentation of aggregates due to their increased sizes, resulting in a steadystate spectrum that is globally smaller (lower particle concentrations in each size class) than that predicted by the curvilinear kernel. Both the peak concentration of particles and the steadystate concentration are lower when the intermediate Re kernel is used. Peak particle numbers are highest for the single cells, and in this size class use of the intermediate Re kernel results in values 33.4% of that for the curvilinear case (3.2 × 10^{7} vs. 9.5 × 10^{7} cells per cubic centimeter), with the peak occurring 2 days earlier for the intermediate Re kernel (day 9 vs. day 11). The resultant steadystate spectrum is lower for the intermediate Re case (31.7% of curvilinear values: 2.7 × 10^{7} vs. 8.5 × 10^{7} cells per cubic centimeter) and, for the individual plankton cells, this state occurs a day earlier than for the curvilinear case (day 13 vs. day 14).
Discussion
The results presented here indicate the importance of considering a flow regime that falls between the main foci of most researchers. The implications of intermediate Re fluid dynamics for biology have been touched upon only rarely (6–9, 27, 28), and even less so for other disciplines. For instance, dramatic shifts in function have been attributed to movement of arrays of cylindrical structures at low to intermediate Re in lobsters and copepods (8). However, the effects of this regime on particle dynamics, and the mechanisms responsible have never been examined. In general it seems that particle dynamics in the intermediate Re regime offer filter feeding animals substantial gains in terms of encounters with food, and provide a mechanism to greatly enhance particle aggregation rates through sedimentation.
The results for cylindrical collectors should be considered from the perspective of the global importance of filter feeders in both ecological (1, 4) and economic (2, 29) contexts. To do so, using morphological measurements taken from the literature, I assessed the prevalence of intermediate Re regimes among filter feeders. Data were available for 113 filter feeding species ranging from singlecelled protists to baleen whales (see Table S1). Feeding element diameter is bimodally distributed (Fig. 6A), indicating strong selection for 2 substantially different size ranges. This bimodality is potentially driven by the energetic benefits of operating in the intermediate Re regime, mediated by the inherent sizeRe correlation in biological systems (large animals operate at higher Re). Thus, smaller filter feeders may be unable to reach “higher” Re, and indeed, those that use cilia and flagella may be limited to low Re because these organs are specifically adapted to produce movement in an environment where flows are reversible. Thirtyfive (31%) of the species have collecting elements whose width is >90 μm wide (the modal size for the larger size peak), requiring a free stream velocity of just 11 mm·s^{−1} to result in Re_{c} = 1. Such velocities (however generated) are well within the range normally experienced by suspensionfeeding organs (30–32). In comparison, at the modal size for the smaller peak (0.2 μm), a free stream velocity of 4.6 × 10^{3} mm·s^{−1} is required for the same Re_{c}: Such high velocities are clearly unrealistic for small collectors. Suspension feeders are found in most extant animal taxa and several groups appear to span both size groups (Fig. 6B). Several of the animals positively identified in the literature as operating at intermediate Re have feeding elements substantially smaller than the modal 90 μm. Clearly, a large proportion of filter feeders are likely to be operating in the intermediate regime, thus reaping the benefits of the associated increase in food encounter rate. Nonetheless, most discussions of filter feeding dynamics implicitly assume that the lowRe formulations are valid (ref. 6; but see ref. 10 for an explicit example), and the lack of information on the intermediate Re regime means that the lowRe formulations are the only ones considered.
The model of coagulation within a plankton bloom shows that the formation of aggregates that operate in the intermediate Re regime leads to a cycle of increased encounter rates, increased aggregation rates and ultimately much more rapid removal of particulate carbon from the upper ocean than predicted by current models. Thus, intermediate Re interactions are likely to play a substantial part in oceanic particle dynamics, with followon implications for climate modeling and understanding of the global carbon cycle (33, 34).
Although the results here are generated using simplifying assumptions, a major concern in coagulation studies is the porosity of the aggregates formed by particle collisions (22, 35). Many marine aggregates have a fractal geometry and are therefore characterized using a fractal dimension (D) (with D < 3 indicating that the aggregate does not fill all of the available volume). Using a representative fractal dimension of 2.2 for the particles (36) in the plankton bloom model for both the intermediate Re and curvilinear kernels increases the rate of sinking of larger aggregates (as water is able to flow within the matrix of the aggregate), but has little qualitative effect on the bloom pattern, except that the intermediate Re case diverges further still from the pattern of the curvilinear kernel case. Interestingly, the kernel generated by the intermediate Re case (Fig. S1) falls between the rectilinear and curvilinear. This pattern, found in experimental studies has been explained by the fractal geometry of the aggregates (37), but given the Reynolds number involved (estimated at up to Re = 1) at least some of this effect may be due to intermediate Re dynamics.
The focus here on differential sedimentation is because of the clear relevance to streamline compression, but for field coagulation of phytoplankton, shear coagulation and differential sedimentation are often approximately equal in magnitude. The implications of intermediate Re for shear coagulation are not clear, but inclusion of current shear coagulation kernels in the model presented here would only qualitatively change the results as coagulation kernels are considered additive (22).
The assumption of point particles that do not perturb the flow field around the collector (see Materials and Methods) is the basis for the majority of plankton coagulation models, but clearly neglects a number of potentially important interactions. The most obvious is the potential for interaction of wakes between similarly sized particles. Incorporation of more accurate modeling of flow fields and surface interactions is possible (22, 38) and requires further study.
These results show that both predators and their planktonic or particulate prey can operate at intermediate Re, and that this flow regime has direct consequences for the ecology and evolution of aquatic ecosystems. Given the importance of filter feeders, plankton and suspended particles to both marine and fresh waters, the implications for understanding of aquatic food webs and nutrient cycling are great.
Although illustrated with biological systems, these results are directly relevant to reaction engineering and wastewater treatment; because identical methods are used to model reactions involving crystallization, flocculation and aerosol coagulation (39–42). Current research in these areas is based on lowReynolds number kernels, valid for Re ≪ 1 (based on the radius of the larger sphere). The intermediate Re kernel resulting from the numerical results differs substantially from those derived from lowRe number theory (Fig. S1). Given the fit of the numerical results to the solitary set of empirical data available (re.f 9 for the upper range of intermediate Re), the application of intermediate Re interactions to models of industrial processes could yield new improvements in reaction yield and filtration systems could be tuned to further optimise particle removal for industrial or medical uses.
In summary, these results expand current theory relating to the dynamics of particlefluid systems, indicating increases in particle encounter rate at intermediate Re. To benefit from this flow regime the filtering organs of many extant filter feeders have been selected upon to operate in the intermediate Re regime. The importance of intermediate Re dynamics to a wide range of problems has hitherto been neglected, and these results suggest that the incorporation of such interactions across a large class of biological and physical problems should prove profitable in a diverse number of applications because many globally important fluxes (oceanic carbon cycling, precipitation), and applied applications (air filtration, industrial separation techniques) are driven by identical particle encounter processes.
Materials and Methods
Two finite element models were constructed and analyzed using the COMSOL Multiphysics package (COMSOL AB). Pathlines of massless particles following local velocity vectors were generated, and the results used to calculate the point of closest approach to the cylinder or sphere surface for particles released into the flow. The use of “massless point particles” that are essentially infinitely small and do not interact with the flow is routine in fluid dynamic studies, and as the flow field of the larger solid (i.e., the cylinder or the larger of 2 particles) tends to dominate the effect of the smaller particle in can be ignored (43, 44). The impact of the coagulation kernels on plankton floc formation was analyzed using a modified version of Jackson's (23) model of plankton growth coupled to aggregate formation. The basic model is freely available as Matlab code under the GNU public licence (26) at http://oceanz.tamu.edu/∼ecomodel/Software/coagmodel/coagintro.html.
Model Construction.
The computational domain for the cylinder (Fig. S2) consisted of a semicircle with a noslip condition enforced on its circumference. The inlet condition on the left boundary was for steady flow, whereas the outlet on the right was for constant pressure. A symmetry boundary on the lower edge of the geometry reduced computational demands while a neutral boundary condition on the upper boundary simulated an infinite fluid domain (45). The spherical geometry was constructed in COMSOL's 2D axial symmetry mode, and differed from the cylindrical geometry only in that the symmetry boundary on the lower edge became a 2D axial symmetry boundary, also resulting in a slightly different mesh configuration (see below). The models were solved using a parametric solver to step up through Re_{c} values from 1 × 10^{−6} to 50, using the solution from previous step as the initial values for the next step. The parametric solver utilised a direct (UMFPACK) solver system.
To capture the flow characteristics close to the solid surface, the meshing interface in COMSOL was set to impose 2000 mesh elements on the solid boundary, resulting in a mesh with 34199 triangular elements, 167425 d.f. and a minimum element quality of 0.695 for the cylinder, and 35107 elements, 171511 d.f. and minimum element quality of 0.684 for the sphere. Mesh sensitivity was checked by varying the density of the mesh until the changes in the drag coefficient (C_{D}) of the cylinder section were <1%, when the solution was assumed to be gridindependent. C_{D} was calculated by integrating the total stress (viscous + pressure) over the boundary of the cylinder to obtain the drag force (F_{D}), which could be inserted into: where U is the freestream velocity of the fluid, and r_{c} is the radius of the cylinder. Calculated values for C_{D} were compared with experimental and numerical results (46, 47) for drag on an infinite cylinder in steady flow at Re_{c} ≥ 6, exhibiting good fit (Fig. S3). Qualitative analysis of the model shows the expected relaxation of streamline symmetry as Re_{c} increases as the magnitude of inertial effects approaches and then exceeds those of viscosity. During this transition, streamlines diverge and at Re_{c} ≈ 10 separation of flow on the leeward face of the cylinder leads to the formation of a recirculation region anticipating the development of Von Karman vortices at still higher Re_{c}.
Effective Swept Region.
Pathlines of massless point particles (following local velocity vectors) were generated in COMSOL, and the results used to calculate the point of closest approach to the cylinder surface for each of 60 particles distributed logarithmically along the left boundary from the point [0,0] on Fig. S2. The distance normal to the tangent of the cylinder surface to the point of closest approach for each particle gives the radius of the particle that will just intercept the cylinder (r_{p}), whereas the vertical distance from the point [0,0] to the particles release point gives the upstream region swept by the cylinder for particles of radius r_{p}. Dimensional analysis indicated that the effectively swept region (λ) was a function of both Re_{c} and the particle radius (r_{p}). Linear interpolation was used to provide a dataset to which functions of the form γ = ƒ(Re_{c}) were fitted. Regression splines were applied to the particle radius (r_{p}) and the coefficients of the γ functions to provide λ as a function of both Re_{c} and r_{p}. Here, the area swept by the cylinder is simply the effectively swept region from the 2D model, scaled by the projected frontal area of the cylinder (Fig. 2 A and B).
Encounter Efficiency.
Encounter efficiency (ε) is defined as the rate of particle encounter of the cylinder (F_{R}), divided by the flux of particles approaching the cylinder (the number of particles that would pass through area occupied by the cylinder if it were not present). Thus, for the intermediate Re case we obtain This can be compared with the semianalytical result of Fuchs (20) for Re_{c} < 0.1 where R is the ratio of particle and cylinder radii (r_{p}/r_{c}), as seen in Fig. 4.
Spherical collectors.
The effectively swept region (λ) for the sphere (Fig. 2C) was obtained in the same way as for the cylinder. As for the cylindrical case, when restricted to r_{p} ≤ 0.5 and Re_{s} ≤ 10, λ_{sphere} can be approximated to within 2.5% (0.02% for Re_{s} ≤ 0.1). However, in the case of the sphere the accuracy is still within 4% up to Re_{s} = 40 using: where These values were then used to calculate the “differential sedimentation kernel” (β) used in coagulation models: where U_{i} and U_{j} are the velocities of 2 spheres settling due to gravity, and where Re used in the calculation of λ is based on the greater of the two U values. The differential sedimentation kernel describes the situation where one particle sinks faster than another and so catches up with it, leading to an interaction between the two. The use of the higher of the 2 particle velocities in the λ calculation follows from the assumption that the smaller, captured, particle has no effect on the flow field.
The intermediate collision kernel can be compared with those commonly used in coagulation theory, rectilinear (β_{rec}) and curvilinear (β_{cur}) kernels. The former describes particleparticle interactions with no hydrodynamic effect of the falling particles (effective swept area = projected frontal area): whereas the curvilinear kernel incorporates the effect of flow at low Re around the larger of the 2 particles (effective swept area ≪ projected frontal area):
Algal Floc Model.
A modified version of Jackson's (23) model of plankton growth coupled to aggregate formation was used to implement the intermediate Re kernel (Eq. 8). The basic model is freely available as Matlab code under the GNU public licence (26) (http://oceanz.tamu.edu/∼ecomodel/Software/coagmodel/coagintro.html). The model uses the sectional method (39, 40, 48) to transform the underlying Smoluchowskitype integrodifferential equation into a series of coupled ordinary differential equations. where the particle size spectrum n(m) is given in terms of mass. The equation gives the rate of change in a continuous particle size spectrum due to the addition or removal of particles from size classes (sections) due to collision (β) and subsequent sticking (α) of particles. The initial conditions assume equal particle mass in each section, which is then solved to find a steadystate spectrum to use as the starting point for the discretised coagulation equations. Coagulation is thus initiated by the presence of aggregates in the initial size spectrum.
The model considers an initial population of individual algal cells growing at a rate η by division into 2 daughter cells identical to the parent. Cells sink at a rate determined by their effective weight (based on density) and size, following Stokesian dynamics, as do aggregates that are formed when cells collide. Collisions are determined by the local cell concentration and by the interactions described by the collision kernel β. Cells and aggregates sinking from the simulation domain are removed from the population.
The code was further modified to correctly model sinking rates of particles or aggregations large or fast enough not to meet the assumptions of Stokes's law. Sinking rate was estimated by using the empiricallyderived formulation of Brown and Lawler (49), which spans both the Stokes regime and Re up to ≈5000.
Model parameters were set to those used in Jackson (23), except in the implementation of the coagulation kernels (Table 1). Because the aim was to highlight the differences between low and intermediate Re effects for general particle coagulation systems, both Brownian and shear collision kernels were excluded from the model runs, leaving only the effects of differential sedimentation. Because of the limits of the approximations used for λ Eq. 8 the kernel β_{int} used a maximum Re of 40, above which the assumption Re = 40 was made for all interactions.
Acknowledgments
I thank Graeme Ruxton, William Zimmerman, Mike Boots, and Lesley Morrell for providing insightful comments and support and 3 anonymous reviewers for providing constructive input that greatly improved the manuscript. This work was supported by Natural Environment Research Council Advanced Research Fellowship NE/B500690/1 (to S.H.). Engineering and Physical Sciences Research Council Grant EP/E01867X/1 (Bridging the Gap between Mathematics, Information and Communication Technology, and Engineering Research at Sheffield) provided funding for a minidiscipline hop that supported the computational modeling work.
Footnotes
 ^{1}To whom correspondence should be addressed at the present address: Department of Biological Sciences, University of Hull, Cottingham Road, KingstonuponHull HU6 7RX, United Kingdom. Email: s.humphries{at}hull.ac.uk

Author contributions: S.H. designed research, performed research, analyzed data, and wrote the paper.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.

This article contains supporting information online at www.pnas.org/cgi/content/full/0809063106/DCSupplemental.
References
 ↵
 ↵
 Wildish D,
 Kristmanson D
 ↵
 Wotton RS
 Wotton RS
 ↵
 Hildrew AG,
 Raffaelli DG,
 EdmondsBrown R
 Humphries S
 ↵
 ↵
 Shimeta J,
 Jumars PA
 ↵
 Jiang HS,
 Meneveau C,
 Osborn TR
 ↵
 Brown JH,
 West GB
 Koehl MAR
 ↵
 Palmer M,
 Nepf H,
 Petterson T,
 Ackerman J
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 Koehl MAR
 ↵
 Alldredge A,
 Gotschalk C
 ↵
 ↵
 Fuchs NA
 ↵
 ↵
 ↵
 ↵
 ↵
 Droppo I,
 Leppard G,
 Liss S,
 Milligan T
 Jackson GA
 ↵
 Jackson GA
 ↵
 Jiang HS,
 Meneveau C,
 Osborn TR
 ↵
 ↵
 Dame RF,
 Olenin S
 ↵
 ↵
 ↵
 Sebens K,
 Helmuth BST,
 Carrington E,
 Agius B
 ↵
 ↵
 ↵
 ↵
 ↵
 Li XY,
 Logan BE
 ↵
 ↵
 ↵
 ↵
 Thomas D,
 Judd S,
 Fawcett N
 ↵
 ↵
 Brown RC
 ↵
 ↵
 ↵
 ↵
 Takami H,
 Keller H
 ↵
 ↵
Citation Manager Formats
Sign up for Article Alerts
Jump to section
You May Also be Interested in
More Articles of This Classification
Physical Sciences
Engineering
Biological Sciences
Related Content
 No related articles found.
Cited by...
 Manta rays feed using ricochet separation, a novel nonclogging filtration mechanism
 Motile cilia create fluidmechanical microhabitats for the active recruitment of the host microbiome
 Microfluidic Studies of Biofilm Formation in Dynamic Environments
 Enhancement of biomixing by swimming algal cells in twodimensional films
 Filtration of submicrometer particles by pelagic tunicates
 FILTER FEEDING AT INTERMEDIATE REYNOLDS NUMBER