New Research In
Physical Sciences
Social Sciences
Featured Portals
Articles by Topic
Biological Sciences
Featured Portals
Articles by Topic
 Agricultural Sciences
 Anthropology
 Applied Biological Sciences
 Biochemistry
 Biophysics and Computational Biology
 Cell Biology
 Developmental Biology
 Ecology
 Environmental Sciences
 Evolution
 Genetics
 Immunology and Inflammation
 Medical Sciences
 Microbiology
 Neuroscience
 Pharmacology
 Physiology
 Plant Biology
 Population Biology
 Psychological and Cognitive Sciences
 Sustainability Science
 Systems Biology
The mechanics of slithering locomotion

Edited by Charles S. Peskin, New York University, New York, NY, and approved April 22, 2009 (received for review December 12, 2008)
Abstract
In this experimental and theoretical study, we investigate the slithering of snakes on flat surfaces. Previous studies of slithering have rested on the assumption that snakes slither by pushing laterally against rocks and branches. In this study, we develop a theoretical model for slithering locomotion by observing snake motion kinematics and experimentally measuring the friction coefficients of snakeskin. Our predictions of body speed show good agreement with observations, demonstrating that snake propulsion on flat ground, and possibly in general, relies critically on the frictional anisotropy of their scales. We have also highlighted the importance of weight distribution in lateral undulation, previously difficult to visualize and hence assumed uniform. The ability to redistribute weight, clearly of importance when appendages are airborne in limbed locomotion, has a much broader generality, as shown by its role in improving limbless locomotion.
Limbless creatures are slender and flexible, enabling them to use methods of locomotion that are fundamentally different from the more commonly studied flying, swimming, walking, and running used by similarly sized limbed or finned organisms. These methods can be as efficient as legged locomotion (1) and moreover are particularly versatile when moving over uneven terrain or through narrow crevices, for which the possession of limbs would be an impediment (2, 3). Limbless invertebrates such as slugs propel themselves by generating lubrication forces with their mucuscovered bodies; earthworms move by ratcheting: propulsion is achieved by engaging their hairs in the ground as they elongate and shorten their bodies (4, 5). Terrestrial snakes propel themselves by using a variety of techniques, including slithering by lateral undulation of the body, rectilinear progression by unilateral contraction/extension of their belly, concertinalike motion by folding the body as the pleats of an accordion, and sidewinding motion by throwing the body into a series of helices. This report will focus on lateral undulation, whose utility to locomotion by snakes has been previously described on the basis of push points: Snakes slither by driving their flanks laterally against neighboring rocks and branches found along the ground (6–11). This key assumption has informed numerous theoretical analyses (12–17) and facilitated the design of snake robots for searchandrescue operations. Previous investigators (7, 9, 18, 19) have suggested that the frictional anisotropy of the snake's belly scales might play a role in locomotion over flat surfaces. The details of this frictionbased process, however, remain to be understood; consequently, snake robots have been generally built to slither over flat surfaces by using passive wheels fixed to the body that resist lateral motion (18, 20–22). In this report, we present a theory for how snakes slither, or how wheelless snake robots can be designed to slither, on relatively featureless terrain, such as sand or bare rock, which do not provide obvious push points.
Model
We model snakes (Fig. 1 A and B) as inextensible 1dimensional curves X(s,t) = (x(s,t),y(s,t)) of fixed length L and uniform mass per unit length ν (Fig. 1C). Here, s is the curve arc length measured from the head, and t is time. The snakes' motion arises through balancing body inertia at each point along the curve with the sum of frictional forces per unit length, f_{fric}, and internal forces, f_{int}, generated by the snakes. That is,
where Ẍ is the acceleration at each point along the snake's body. To avoid complex issues of muscle and tissue modeling, f_{int} is determined to be that necessary for the model snake to produce the observed shape kinematics. We use a sliding friction law in which the friction force per unit length is f = −μ^{k}νgû, where μ^{k} is the sliding friction coefficient, û = u/∣u∣ is the velocity direction, and νg is the normal force per unit length applied by the snake to the ground. We assume that the sliding friction coefficients μ_{k} are equal (or at least proportional) to the corresponding static ones we have measured [(μ_{f}^{k}, μ_{t}^{k}, μ_{b}^{k}) = α(μ_{f}, μ_{t}, μ_{b})]. Applied to incorporate our measured frictional anisotropies, we model f_{fric} simply as a weighted average of independent frictional responses to motions in the forwards (ŝ), backwards (−ŝ), and transverse directions (n̂). That is,
where H =
A critical parameter that arises in our theory is the socalled “Froude number,” Fr = (L/τ^{2})/μg, which measures the relative importance of inertial to frictional forces (which both scale with mass). From our observations, we estimate that frictional forces are an order of magnitude greater than inertial forces (i.e., Fr ≈ 0.1, using μ = 0.2; see Fig. 1), which gives the important result that, unlike most other terrestrial organisms of this size, body inertia is not central to slithering locomotion. Motion instead arises by the interaction of surface friction and internal body forces. Even the red racer (24), one of the world's fastest snakes, has Fr ≈ 1 − 1.5(L = 60 − 130 cm, U = 130 cm/s), indicating that its body inertia is not predominant. In the zero Fr limit, forces are transduced directly to velocities rather than accelerations, which is also a feature of the low Reynolds number locomotion of microorganisms through a fluid (25). Another simplifying aspect for our particular model is that for low Fr motion on horizontal surfaces, the dynamics depends on only 2 ratios of friction coefficients, say μ_{f}/μ_{t} and μ_{b}/μ_{t}.
Results
The wide overlapping belly scales of these snakes have an important function: They snag on ground asperities, a phenomenon that was audible during experiments (Fig. 1B). As a result, these scales provide the snake a preferred direction of sliding on surfaces of sufficient roughness and compliance, as can be shown by the clear anisotropy in friction coefficients on the cloth surface (Fig. 1E). The static friction coefficient μ is least if the snakes are sliding forward (μ_{f} = 0.11 ± 0.011), intermediate if sliding tailward (μ_{b} = 0.14 ± 0.015), and highest toward its flanks (μ_{t} = 0.20 ± 0.015). On the other hand, the smooth surface, which provides few if any asperities for the scales to catch on, shows friction coefficients that are nearly independent of orientation (μ_{f} ≈ 0.14, μ_{t} ≈ 0.16, μ_{b} ≈ 0.14). The values of these coefficients are slightly less than those measured elsewhere (7) for dead snakes on various surfaces (μ_{f} and μ_{b} between 0.24 and 1.30). We also observe that while the snakes were recovering from unconsciousness, they began twitching their scales individually. This level of control is consistent with their neuromuscular anatomy (2), which shows that each scale has its own muscular attachment.
The snake's frictional anisotropy with the surface is critical to its motion, at least on horizontal surfaces (angle of inclination φ = 0). Fig. 2a′ shows timelapse photographs of a snake unsuccessfully attempting to slither forward when placed on a smooth surface. No such difficulties are presented when the snake is placed on the rough surface, as illustrated by Fig. 2a″. The snakes' motion kinematics were also filmed and digitized (n = 20), and the open circles in Fig. 2 A–C shows the measured positions of the snakes' center of mass during steady undulation, where quantities have been normalized by body length L = 30 cm and time normalized by period of undulation τ = 2 s. It is noteworthy that whereas the body kinematics are undulatory (with a dimensionless wavelength of 0.4 ± 0.1 and an amplitude of A = 0.1 ± 0.03), the motion of the center of mass (X̄, Ȳ) is almost purely translational. The snakes' forward speeds are nearly steady (Ū = 0.22 ± 0.08), whereas their speeds transverse to the direction of motion are negligible (V̄ = 0.0 ± 0.03; see Fig. 2 A and B). The snakes' mean angle of orientation θ̄ rotates substantially (20 ± 5°) during slithering (Fig. 2C). We note that the snakes' undulation is not always steady, as shown by the small changes in their periods of undulation shown in Fig. 2C. We also observe that, at least on horizontal surfaces, the snakes are capable of short bursts of speed of 0.4, or nearly double its steady speed (as shown by error bars in Fig. 2A and in speed data for φ = 0 in Fig. 2D).
Experiments (n = 70) were performed to determine the snakes' speed on cloth surfaces set at inclinations φ to the horizontal between −20° and 20°, angles corresponding to the snake slithering downhill and uphill, respectively (Fig. 2D). At inclinations below a critical inclination of φ* = 7 ± 2°, the snakes successfully slither forward by lateral undulation; at inclinations of φ*, the snakes slither in place; at inclinations below φ*, the snakes attempt to slither forward but, instead, slide backward.
We now compare our experimental observations with the predictions of our theoretical model, first using our model to describe the measured frictional anisotropy. The average friction coefficients for our straight snakes are given by Eq. 2 as μ̄ = μ_{t}sin^{2}θ̄ + [μ_{f}H(cosθ̄) + μ_{b}(1 − H(cosθ̄))]cos^{2}θ̄. By using the data in Fig. 1D, the leastsquares estimates for the friction coefficients are μ_{f} = 0.11, μ_{t} = 0.19, and μ_{b} = 0.14. Because these values provide a frictional dependence on orientation that is in approximate accordance with our data, they will be used henceforth in our simulations.
Next, we use the observed snake shape dynamics to study the motions predicted by our model. As an Ansatz, we assume snakes' undulation is described by a simple traveling wave in curvature: κ(s, t) = αcoskπ(s + t) (in dimensionless units). Typical values from our observation are α = 7 and k = 2, which we use in our numerical simulation. First, to understand our observations of snake motion on a smooth surface, we set μ_{f} = μ_{b} = μ_{t}, and find little if any locomotion of the snake. On the other hand, using the measured frictional anisotropy, we predict trajectories of the model snake on a horizontal surface fairly consistent with those observed: specifically, Ȳ and θ̄ in Fig. 2 A–C are well accounted for, and forward speeds Ū of 0.17 are lower than the mean but within the standard error found in experiments.
Our prediction of the snakes' body speeds on the incline also show good agreement with observations. Fig. 2D shows the measured snake speeds compared with 3 theoretical predictions given by our model, found by varying the forward friction coefficient μ_{f} from 0.1 to 0.3 and keeping the remaining coefficients in the ratio μ_{t} = 1.8μ_{f}, μ_{b} = 1.3μ_{f}. We find that this range of friction coefficients accounts for the trends observed.
Discussion
Our simple theoretical model based on snake friction coefficients captures the general trends found in our experiments, although predicted speeds tend be somewhat lower than those measured. We offer several possible sources of discrepancy between observed and predicted speeds. We believe that the largest contributor to these disparities is given by the dynamic loadbalancing we have observed in snake locomotion. Previous investigators (8, 9, 18) have observed that at high speeds, snakes lift the curved parts of their bodies off of the ground as they travel in lateral undulation and in sidewinding (26). This can be seen clearly in Fig. 3A, which shows a corn snake slithering on a mirrored surface. Through the lens of our model, we interpret this behavior as the snake dynamically distributing its weight so that its belly is periodically loaded (pressed) and unloaded (lifted), concentrating its weight on specific points of contact. We have observed that these points of contact correspond approximately to points of zero body curvature. By incorporating into the frictional force of our model a nonuniform weight distribution that concentrates weight on points of zero body curvature, we provide a mechanical rationale for bodylifting. The speeds of a lifted snake model and a uniformweight snake model are shown by the solid and dashed curves, respectively, in Fig. 2 A–C. These calculations show that unloading of the model snakes' body leads to augmentation of forward speed Ū_{avg} from 0.17 to 0.23, an increase of 35% that is in greater accordance the observed speeds. Moreover, we find that the lifted snake has a mechanical efficiency η of 0.29 compared with 0.20 for a nonlifted snake, an increase of nearly 50%, although this estimate does not account for the work required for the snake to lift its body. Fig. 3 B and C compares the frictional force distributions along the model snake in both the nonlifting and lifting gaits. It shows that lifting changes the direction of frictional forces of the parts of the snake that remain in firm contact with the ground. In particular, inflection points in shape (marked by black dots) where the load is greatest have an increased thrust component. Even with lifting, we do not fully account for the high range of snake speeds observed in the data (Ū = 0.15–0.4, Fig. 2) although we did not attempt to optimize the weight distribution model. There are several other possible sources of modeling error or omission. For example, we have modeled the tail as having the same crosssection and mass per unit length as the body; if we include the actual tapering of the tail, the effective length L of the snake decreases, worsening our speed prediction.
Another aspect that we have not considered is that snakes are likely able to dynamically change their frictional interactions with a surface by adjusting the attitude of their scales, a possibility that bears on our assumption of independent friction coefficients in Eq. 2. As suggested by the theoretical predictions of motion on a ramp in Fig. 2D, which fit the experimental data better with forward friction coefficients of 0.3 rather than 0.1, snakes may be able to alter their frictional properties when moving up and down a slope.
Statistical Methods
Animals.
Ten juvenile Pueblan milk snakes (Lampropeltis triangulum campbelli, Fig. 1 A and B) of mass 15.2 ± 2.6 g (mean ± SE) and length L of 36 ± 2.3 cm were obtained from a reptile breeder (Staten Island Serpents). Animals were housed singly in 2L terrariums in an animal care facility and fed a diet of water and pinky mice. Animals were illuminated for 12 h per day and housed at 80 ± 3.6 °F, and humidity 23 ± 10%.
Friction Measurement.
Snakes underwent general anesthesia using 5% isoflurane provided by 1.0Lpm O_{2} in a 1L chamber. Unconscious snakes were arranged in 9 orientations, from θ̄ = 0° to θ̄ = 180° on an inclined plane (Fig. 1D) covered with 2 materials, (i) a cloth whose characteristic length scale of roughness (0.2 mm) is comparable with the thickness of the snake's belly scales (0.1 mm) and (ii) a smooth fiberboard, whose scale of roughness 20 μm (27) is much less than that of the snake's scales. The edge of the inclined plane was lifted by hand until an inclination φ was reached at which the snakes began sliding; geometry shows that the static friction coefficient μ = tanφ. Trials in which the snake rolled instead of slid were not analyzed; in all, 90 friction measurements were made.
Slithering Observations.
Using a video camera (Sony), we observed snakes slithering over a plank 30 × 120 cm covered with either cloth or fiberboard, set at differing angles of inclination. Speeds of the center of mass were determined by image digitization and analysis using MATLAB. Movies in which the snake changed direction or gaits were not analyzed; in all, 70 films were of snake motion were analyzed.
Acknowledgments
All housing and experimental procedures were approved by New York University and Georgia Institute of Technology animal welfare in protocols 061276 and A09004, respectively. We thank J. Keller, J. Bush, S. Childress, and J. Zhang for useful discussions; K. Mareck for early work on experiments; and G. Pryor for photographing Figs. 1A and 3A. This work was supported by the Lilian and George Lyttle Chair of Applied Mathematics, New York University.
Footnotes
 ^{1}To whom correspondence should be addressed at: Georgia Institute of Technology, ATTN: David Hu, 801 Ferst Drive, MRDC 1308, Atlanta, GA 303320405. Email: hu{at}me.gatech.edu

Author contributions: D.L.H., J.N., T.S., and M.J.S. performed research; D.L.H. analyzed data; and D.L.H. and M.J.S. wrote the paper.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.
References
 ↵
 Walton M,
 Jayne BC,
 Bennett AF
 ↵
 Siegel RA,
 Collins JT,
 Novak SS
 Cundall D
 ↵
 Bellairs A
 ↵
 Trueman ER
 ↵
 ↵
 Gray J
 ↵
 ↵
 Jayne BC
 ↵
 Gans C
 ↵
 Mosauer W
 ↵
 Renous S,
 Hofling E,
 Gasc JP
 ↵
 Mahadevan L,
 Daniel S,
 Chaudhury MK
 ↵
 Guo ZV,
 Mahadevan L
 ↵
 Burdick JW,
 Radford J,
 Chirikjian GS
 ↵
 Ostrowksi J,
 Burdick J
 ↵
 ↵
 Rachevsky N
 ↵
 Hirose S
 ↵
 ↵
 Dowling KJ
 ↵
 Choset HM
 ↵
 Davis JL,
 Ayers J,
 Rudolph A
 Miller GSP
 ↵
 Alexander RM
 ↵
 ↵
 Childress S
 ↵
 Secors SM,
 Jayne BC,
 Bennett AC
 ↵
 Akbulut T,
 Ayrilmis N
Citation Manager Formats
Sign up for Article Alerts
Article Classifications
 Physical Sciences
 Applied Physical Sciences
 Biological Sciences
 Applied Biological Sciences