New Research In
Physical Sciences
Social Sciences
Featured Portals
Articles by Topic
Biological Sciences
Featured Portals
Articles by Topic
 Agricultural Sciences
 Anthropology
 Applied Biological Sciences
 Biochemistry
 Biophysics and Computational Biology
 Cell Biology
 Developmental Biology
 Ecology
 Environmental Sciences
 Evolution
 Genetics
 Immunology and Inflammation
 Medical Sciences
 Microbiology
 Neuroscience
 Pharmacology
 Physiology
 Plant Biology
 Population Biology
 Psychological and Cognitive Sciences
 Sustainability Science
 Systems Biology
A theory of microtubule catastrophes and their regulation

Edited by Don W. Cleveland, University of California at San Diego, La Jolla, CA, and approved October 22, 2009

↵^{1}L.B. and B.R. contributed equally to this work. (received for review September 21, 2009)
Abstract
Dynamic instability, in which abrupt transitions occur between growing and shrinking states, is an intrinsic property of microtubules that is regulated by both mechanics and specialized proteins. We discuss a model of dynamic instability based on the popular idea that growth is maintained by a cap at the tip of the fiber. The loss of this cap is thought to trigger the transition from growth to shrinkage, called a catastrophe. The model includes longitudinal interactions between the terminal tubulins of each protofilament and “gating rescues” between neighboring protofilaments. These interactions allow individual protofilaments to transiently shorten during a phase of overall microtubule growth. The model reproduces the reported dependency of the catastrophe rate on tubulin concentration, the time between tubulin dilution and catastrophe, and the induction of microtubule catastrophes by walking depolymerases. The model also reproduces the comet tail distribution that is characteristic of proteins that bind to the tips of growing microtubules.
Microtubules are microscopic tubes composed of an ordered lattice of αβtubulin dimers. The uniform orientation of these dimers confers a polarity on microtubules that enables directed intracellular transport. Microtubules are also the main component of the mitotic spindle, and they are therefore essential for cell division. Microtubules selfassemble and exhibit an unusual behavior termed dynamic instability (1). Dynamically unstable microtubules undergo alternating periods of growth and shrinkage, with rapid transitions between these states. The switch from growth to shrinkage is called a catastrophe, and the reverse is called a rescue. In the cell, dynamic instability is essential for allowing the cytoskeleton to organize in response to cellular cues (2).
Dynamic instability of the microtubule plusend has been described as a twostate system (growth and shrinkage) with stochastic transitions between the two states (3, 4). The simplest version of this model assumes constant switching probabilities and can be solved analytically (5). More complicated models that include additional dynamic states have been proposed after detailed observations of microtubule dynamics in cell extracts (6).
Dynamic instability requires an increase in the chemical potential of tubulins after assembly. This energy is provided by hydrolysis of a GTP bound to tubulin. Specifically, tubulin loaded with GTP is added at the tip of the microtubule (1), and the nucleotide is later hydrolyzed to GDP within the fiber.
Several authors have attempted to explain dynamic instability as an interplay between the addition of GTPtubulin and hydrolysis of GTP in the fiber lattice (1). It is commonly assumed that GTP tubulins situated at the microtubule tip form a cap that stabilizes the growing state. When the cap is lost or broken by hydrolysis, a catastrophe follows. Numerous models based on this idea have been proposed, which are either discrete (7, 8) or continuous (9), with more detailed descriptions also incorporating the mechanical stability of the lattice (10, 11).
The different modeling approaches have distinct strengths and weaknesses. The phenomenological model is simple and successfully reproduces dynamic instability, but provides no insight into the underlying mechanisms that give rise to it. Therefore, it cannot predict how the rates of dynamic transitions are influenced by external regulatory factors. The detailed mechanical approaches often lead to assumptions that cannot be measured experimentally, such as interactions between protofilaments (12). Finally, the continuous approach may not be appropriate if the number of GTP subunits present in the cap is small, as has been suggested by dilution experiments (13).
Future studies on microtubule organization would benefit greatly from a simple, yet predictive, description of dynamic instability, because changes in dynamics could then be linked directly to the regulatory mechanisms of microtubuleassociated proteins (MAPs). Even in comparatively simple cells, such as fission yeast, numerous mechanisms are known to influence microtubule dynamic instability. The most fundamental is the limited abundance of tubulin; a growing microtubule depletes the concentration of free tubulin, leading to negative feedback between polymer mass and microtubule growth (14). A second important effect is the encounter of microtubule tips with the physical boundaries of the cell (15). Besides these two basic processes, which arise from the intrinsic properties of tubulin, dynamic instability is also regulated by numerous MAPs. Ideally, a model would be capable of providing a mechanistic link between these processes and microtubule dynamics.
Fortunately, substantial quantitative data characterizing the basic regulatory mechanisms have been obtained from in vitro experiments. It has been shown, for instance, that the growth speed and catastrophe time depend linearly on the concentration of free tubulin (16). Similar experiments addressed the effects of force on the frequency of catastrophes. The results suggested that force increases the catastrophe rate indirectly by lowering the rate at which GTPtubulin is incorporated into the microtubule tip. In other words, force has a similar effect to reducing the free tubulin concentration (16). The mechanisms by which MAPs alter the dynamic properties of microtubules have not been determined in most cases (17). However, it has been proposed that motors from the depolymerizing kinesin8 family induce catastrophes in a microtubule lengthdependent manner by walking processively to the plus end and removing the terminal tubulin subunit (18, 19). These in vitro data are supported by livecell imaging experiments in Schizosaccharomyces pombe that indicate that kinesin8 motors induce catastrophe with a rate that depends on microtubule length (20).
In this study we construct a model for microtubule dynamic instability that quantitatively reproduces the continuous data from these experiments. We first describe and analyze a 1D model of dynamic instability, which correctly reproduces the classical experiments on microtubule growth (13, 16). The simplicity and analytical tractability of this model suggest a specific mechanism for transitions between growth and shrinkage. The model most closely matching the experimental data is extended to multiple protofilaments, allowing it to exhibit shortening excursions during periods of overall growth (22, 30). The dispersion of protofilament lengths in this model is consistent with the distribution of EB1 family protein decorating tips of growing microtubules (23). Finally, the effect of a kinesin8 depolymerizing motor is studied and compared with livecell imaging experiments (20).
1D Model
The first model considers a simple 1D lattice composed of units that exist in one of two states. For clarity, we refer here to the association of the units with GDP or GTP, although we later discuss that the two states could be of a different nature. Shrinkage and rescue are not considered. The model predicts the time of the catastrophe for a microtubule that is initially growing. The addition of a GTP unit at the tip occurs with firstorder kinetics at rate g, with irreversible hydrolysis occurring at rate h for any GTP unit (Fig. 1).
Finally, an important property of the model is the definition of the pattern leading to catastrophe. Here, a catastrophe occurs when all N terminal units are in the GDP state (Fig. 1). This introduces the third and final parameter of the model: an integer N, which we refer to as the coupling parameter. This parameter reflects the number of distinct changes that must occur for a catastrophe to be initiated. In Results and Discussion we describe in greater detail the experimental data used to test this model.
Basic Regulation of Catastrophe
The first body of experiments is concerned with the influence of free tubulin concentration or force on microtubule catastrophes. This effect is present in cells, where microtubules are confined by the cell cortex and tubulin concentration is constant over the lifetime of a typical microtubule. This situation is achieved in vitro by nucleating microtubules from seeds (24) and either modulating the tubulin concentration or applying compressive forces on the microtubule tip. In both cases, the catastrophe times are related linearly to the average growth speeds (13, 16) (Fig. 2A).
A second body of information is given by dilution experiments. Although this situation does not occur commonly in vivo, these experiments are useful for elucidating the mechanisms that lead to dynamic instability. In dilution experiments, microtubules are first grown at a high tubulin concentration, with a correspondingly high assembly rate v_{growth}. The concentration of tubulin is then reduced rapidly, which leads to induction of catastrophes by preventing further growth of the microtubule. The time elapsed between dilution and catastrophe (catastrophe time) is recorded (Fig. 2B). These experiments have shown that the mean catastrophe time is independent of the growth speed before dilution (16, 25), and the stabilizing cap at the tip of growing microtubules is short, containing fewer than ≈40 GTP units (25, 26).
Results and Discussion
The 1D model was first tested for its ability to reproduce the frequency of catastrophe for different microtubule growth speeds. The model has three parameters: the growth rate g, the hydrolysis rate h, and the coupling parameter N. However, g is linked directly to the average growth speed v_{growth} = gδ, where δ = 8 nm is the length of one tubulin unit. The rate of hydrolysis h was assumed constant under different microtubule growth rates and was estimated for each model independently. It was determined by fitting the catastrophe time of each model to that observed for microtubules growing at a speed of 2.4 μm/s, thus constraining all three curves in Fig. 2D to match the experimental data for this speed.
The results for N ∈ {1, 2, 3} are shown on Fig. 2 C and D and indicate that the correct (linear) functional dependence is only obtained for a coupling parameter N = 2. Models with a coupling parameter N other than 2 did not produce a linear dependence (Fig. 2C). The stochastic simulations were verified further by calculating an analytical expression for the mean catastrophe time by treating the cap as a terminating Markov chain (see Materials and Methods). The relationship is approximately linear for N = 2 over the range of measured growth rates, where h ≪ g.
Dilution experiments were simulated by applying a stepwise reduction in the growth speed from v_{growth} to zero, after the cap was allowed to reach equilibrium (see Materials and Methods). All three models successfully reproduced the independence of the mean catastrophe rate after dilution on the growth speed before dilution (Fig. 2D Inset). However, the model with a coupling parameter of N = 1 provided a poor fit to the observed distribution of catastrophe times, and although N = 3 reproduced the correct functional dependence, the closest fit was again obtained for N = 2. In summary, the 1D model matched the variations of catastrophe rates with tubulin concentration only for N = 2. Because h is also constrained by the fitting procedure, all parameters are determined.
Composite Microtubule Model.
Although a 1D model may be appropriate for describing the dynamics of actinrelated fibers (27), microtubules generally contain 13 protofilaments; therefore, we investigated whether the 1D model could be extended to describe such a structure. Because it has been suggested that the longitudinal bonds within protofilaments are strong compared with the lateral interactions (12), we constructed a simple composite model consisting of 13 laterally coupled 1D models (Fig. 3A). For simplicity, the dynamics of each protofilament were modeled with identical values of g, h, and N to the 1D model described in the previous section, and tubulin units were added to each protofilament independently during growth. During shrinkage a protofilament can be rescued by an interaction with a GTP tubulin subunit in a neighboring protofilament, a process that we refer to as “gating rescue” (Fig. 3 B and C). A catastrophe of the microtubule occurs if any one of the 13 protofilaments loses its cap and is not rescued by neighboring protofilaments.
The composite model reproduced the dilution and steadystate experiments (Fig. 4) and exhibits qualitatively identical behavior to the 1D model, albeit with a shorter average catastrophe time for the same h. A close quantitative fit to the experimental data can be recovered by decreasing the rate h by approximately a factor of 2. We also note that the composite model forces neighboring protofilaments to have similar length, thus leading to coherent extensions that are consistent with sheet structures that are observed in electron microscopy reconstructions of dynamic microtubules (29).
+TIP Tracking Tails and Shortening Excursions.
Mal3 is the fission yeast representative of the EB1 family of plustip proteins and has been shown to recognize a structural feature of growing microtubule ends (23). Mal3 localizes with an exponential distribution that peaks at the tips of growing microtubules and an extension that increases linearly with microtubule growth speed (23). To test this idea further, we used stochastic simulations to calculate the distribution of GTP units with respect to the longest protofilament in the microtubule. The resulting distributions are exponential for all simulated growth speeds, and the length scale increases linearly with microtubule growth speeds. The results are even in quantitative agreement with the observed distribution of Mal3 (Fig. 4C), thus supporting the idea that the localization of Mal3 indeed reflects the arrangements of the protofilaments at the tip of the microtubules.
The composite model also exhibits shortening excursions where the longest protofilament shortens during periods of overall microtubule growth. Experiments with microtubules grown against barriers under constant force have suggested that shortening events of up to 40 nm can occur (22). The model is in agreement with the magnitude of the backward steps, predicting an average excursion length of 38 nm (Fig. 4D), but it does not reproduce the frequency of these events.
Because there is some controversy over the design and interpretation of micromechanical measurements of microtubule dynamics (22, 30), these observations cannot yet be used as strong criteria for evaluating models, although this situation is likely to be resolved by future experiments.
Induction of Catastrophe by Kinesin8.
Although in vivo regulation of microtubule dynamic instability by force or tubulin concentration is essential, it is also desirable for a model to capture the regulatory effects of MAPs. For example, the walking depolymerase kinesin8 induces catastrophes in a lengthdependent manner (18, 19). The kinesin8 is postulated to walk processively toward the plus end of the microtubule and promote catastrophe by removing tubulin subunits (Fig. 5A). To test this idea, we added walking depolymerases to the model. The motor could bind along the length of the microtubule to any protofilament and unbind with the measured kinetics. Motors paused at the microtuble tips, but could be pushed by subsequent motors. Moreover, a pushed motor would break off with the associated terminal tubulin, which promoted castastrope by shortening the GTP cap. The effect of kinesin8 produced a linear dependence between the frequency of catastrophe and the length of the microtubule (Fig. 5B), as observed from livecell imaging in fission yeast (20).
The analysis can also be verified further if g and h are set to match the observed in vivo dynamics of microtubules, and if we assume a motor speed of v ≈3 μm/min (18). In that case, the lengthdependent catastrophe rate (20) provides an estimate of the number of kinesin8 binding events at ≈100 s^{−1}. However, if we assume that there are ≈700 kinesin8 molecules per cell [an estimate obtained from budding yeast (31)], the number of diffusional encounters between kinesin8 molecules and a microtubule is expected to be ≈1,000 s^{−1}. Because only a fraction of the collision events may lead to attachment, the postulated mechanism is indeed consistent with the known characteristics of the system.
Conclusion
The model contains only three parameters. Remarkably, the same set of parameters quantitatively reproduced the behavior of microtubules from a compendium of experimental data. Classical in vitro studies on microtubule catastrophes (13, 16) were used to constrained all parameters: g is set by the rate of microtubule growth; h is set by the catastrophe rate at a specific speed, and N is set by the functional dependence of the catastrophe time on growth rate. The agreement with more recent experiments (20, 22, 23) corroborates the underlying physical model of catastrophes.
In particular, the coupling parameter N is critical to determining the dynamics of catastrophes: we could fit the data only if N = 2. This potentially reflects an intrinsic feature of the microtubule cap, but because the model is phenomenological in nature several different mechanistic interpretations can be considered to apply to the microtubule tip. In recent work it has been shown that the assembly of microtubules must also be related to structural changes in the tubulin dimers (32, 33). An alternative interpretation to the classical chemical kinetic view is therefore that the coupling is mechanical in origin and is triggered by the addition of another subunit. In this scenario, GTP hydrolysis could occur after the conformational change associated with the cap, without affecting the stability of the microtubule.
Walker et al. (13) used a similar 1D model that they called coupled hydrolysis. However, they used N = 13, presumably because it is the number of protofilaments in a typical microtubule, and the model could not therefore fully explain the experimental data. Assuming similarly that hydrolysis occurs fast beyond N, the composite model with N = 2 multiplied by 13 protofilaments conforms to the upper bound of ≈40 for the number of GTP units in growing tips of microtubules (13) and is also consistent with the conclusion that a small cap is sufficient to stabilize the fiber (34). Coupled hydrolysis was used subsequently in the “lateral cap model” (35). This model, however, assumed helical growth of the microtubule and among other things failed to match the linear dependence between growth speed and catastrophe time.
The small N also implies that dynamic instability could be influenced by a very small number of molecules. Consequently, the regulation of microtubules by associated proteins should probably be modeled discretely. The 1D and 3D models discussed here are similar. They both reproduce the effect of tubulin concentration and dilution on catastrophes and the effect of walking depolymerases. The 3D model extends the 1D model by incorporating a gating rescue interaction between neighboring protofilaments. This model exhibited backward excursions and provided a plausible mechanism for the distribution of +TIP proteins (22, 23).
Although the gating rescue model is simple and could reflect the essence of protofilament dynamics at the microtubule tip, it could be extended to incorporate other aspects of the assembly process. For example, in the composite model, the kinetics of each protofilament are identical but, in reality, these rates could differ between protofilaments because of differing accessibility to the solvent or mechanical coupling to neighboring protofilaments. It would also be interesting to include the 3D mechanics that define the sheetlike structure of microtubule ends. Despite its simplifications, the model described here is already applicable to many problems involving microtubule organization. For example, recent work on modeling microtubule organization in fission yeast (36) showed that microtubules are regulated mainly by force and the walking depolymerase klp5/klp6, which is a heterodimer from the kinesin8 family. Because the 1D and 3D models account for both of these effects, they should accurately predict the behavior of microtubules in this system, without requiring additional ad hoc parameters.
Microtubule rescues were not considered in the current model, because they occur infrequently in vitro and are likely to be initiated by MAPs by a mechanism that has not yet been identified experimentally. However, rescues and pauses are likely to be important for regulating microtubule dynamics in many cell types such as cultured vertebrate cells or interphasic Xenopus egg extracts (6). When further experimental data become available it should also be possible to incorporate the effect of “stable” GTP remnants in the microtubule lattice (37).
The presented models are simple and mathematically tractable and agree well with many key experimental observations. The effects caused by regulatory proteins, which upon binding locally change the growth or the transition rates of GTP tubulin can be included. They may therefore prove useful in studying the modulation of dynamic instability, which is an essential element of microtubule function in vivo.
Materials and Methods
Analysis of the Models.
Assuming a small time scale τ, the 1D model can be approximated by a Markov chain (28) with 2^{N} states, where N is the coupling parameter. The transitions from one state to another depend only on the probability G = gτ to add a GTP unit at the tip during the time step and the probability H = hτ to hydrolyze any GTP unit during the time step. It is thus possible to derive the state diagram of the Markov chain (see for N = 2, Fig. 6) and its transition matrix. In the model, the state corresponding to a catastrophe terminates the chain and is called the absorbing state. In general, if it is the final element in the state vector, the transition matrix can be written as where P is the square matrix of size (2^{N} − 1) describing the transitions between transient states, 1 is scalar and P^{0} is the vector containing the probabilities to reach the absorbing state from each transient state in one step. The mean number of steps before catastrophe is then M = ω^{t} (I − P)^{−1} 1 (38), where ω is a vector of length (2^{N} − 1) containing the initial probability of each transient state, i is the identity matrix of size (2^{N} − 1), and 1 is the vector [1,1,…, 1] of size (2^{N} − 1).
For example for N = 2, the state vector is [TT, DT, TD, DD], where DD is the absorbing state. The transition matrix reads and for vanishing τ we obtain the average catastrophe time T = τM: In the case where h ≪ g, the linear dependency between the catastrophe time and the growth rate appears: The transition matrix for N = 3 and 4 and the average catastrophe time were derived similarly.
Simulations.
The models were simulated stochastically by using a fixed time step τ = 5 ms, generating trajectories for the Markov process illustrated on Fig. 6. A C++ implementation of the 1D model is available at www.cytosim.org.
To find the dependence of the catastrophe time on the growth speed, the parameter g was varied while h was held constant. The value for h was determined by fitting the catastrophe time of each model to the experimentally observed value of 550 s for microtubules growing at a speed of 2.4 μm·s^{−1} (Fig. 2C).
To simulate the dilution experiments, g was set to 0 after 10 s of simulated time, which is sufficient to reach a steady state for the cap size. To fit the distribution of catastrophe time after dilution (Fig. 2D), we used the number α of GTP units in the cap at dilution time. Because hydrolysis of different units occur independently at rate h, the probability of a catastrophe after a time t is p = (1 − e^{−ht})α. α is used as a fitting parameter to best match the distribution of catastrophe time obtained numerically with the corresponding probability density function αh (e^{ht} − 1)^{α−1}e^{−αht}. The parameter h is known and as expected, the fitderived value of α is between 1 and N.
Walking Depolymerase.
The 3D model was simulated in the presence of depolymerizing kinesin8 molecules. Each unbound kinesin molecule in the simulation contributes a binding probability a = 10^{−4} s^{−1} per binding site on the microtubule. Bound kinesin8 molecules are simulated individually and exclude each other on the microtubule lattice. They bind stochastically to unoccupied sites with a rate a, and then move toward the plus end with an average velocity v = 2v_{growth}. The number of steps made by a kinesin for the time interval τ follows a Poisson law with parameter vτ/δ, but progression is allowed only if the subsequent site is unoccupied. The kinesins walk processively toward the plus end, unbinding stochastically with realistic rate [one event per 1,500 steps (18)]. They stall at the microtubule end, but if another motor arrives subsequently, they detach, removing the terminal tubulin unit with them (19). Microtubules are described with the composite 3D protofilament model with N = 2, h = 0.029 s^{−1}, and g = 3 s^{−1} (v_{growth} ≈1.5 μm/min). Similar results were obtained with the 1D model.
The number of binding events per unit time can be derived by fitting the measured microtubule catastrophe rate using the model of kinesin8 (Fig. 5B). For a 10μmlong microtubule, the total number of binding sites is ≈ 10 × 13/0.008 ≈ 16,000. For the attachment rate per binding site ≈10^{−5}/s obtained from the fit, the number of attachments should be ≈110 per s. However, we can estimate the number of diffusional encounters for a Brownian process. For this, the equation for first capture time ΔW + 1/D = 0 (30) was solved in a cylindrical geometry of length 10 μm and radius R = 2 μm with the boundary conditions ∂_{r}W(R) = 0 (reflecting barrier at the cell membrane) and W(ε) = 0 (absorbing barrier for one microtubule along the central axis). With ε = 30 nm and D = 10 μm^{2}/s, the capture time from an initial position on the cylinder's edge is W(R) ≈0.7 s. With ≈700 proteins in the cell, 700/0.7 = 1,000 collision events are possible per s. Although we cannot estimate the fraction of collisions leading to attachment, this simple calculation sets the lower number of molecules necessary to make this scenario possible.
Acknowledgments
We thank Thomas Surrey, Christian Tischer, and Philipp Keller for critically reading the manuscript; Christian Tischer for sharing unpublished data; and Pierre Connault for discussion. This work was supported by BioMS (Center for Modeling and Simulation in the Biosciences), the Volkswagenstiftung, and Human Frontier Science Program Grant HFSP RGY084.
Footnotes
 ^{2}To whom correspondence should be addressed. Email: nedelec{at}embl.de

Author contributions: F.N. designed research; L.B., B.R., J.J.W., and F.N. performed research; L.B., B.R., J.J.W., and F.N. wrote the paper; L.B. performed simulations and derived analytical results; and B.R. processed simulation outputs and made figures.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.

This article contains supporting information online at www.pnas.org/cgi/content/full/0910774106/DCSupplemental.
References
 ↵
 ↵
 ↵
 Hill TL
 ↵
 Bayley PM,
 Schilstra MJ,
 Martin SR
 ↵
 Verde F,
 Dogterom M,
 Stelzer E,
 Karsenti E,
 Leibler S
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 ↵
 Van Buren V,
 Odde DJ,
 Cassimeris L
 ↵
 Walker RA,
 et al.
 ↵
 ↵
 Gregoretti IV,
 Margolin G,
 Alber MS,
 Goodson HV
 ↵
 Janson ME,
 de Dood ME,
 Dogterom M
 ↵
 ↵
 ↵
 ↵
 Tischer C,
 Brunner D,
 Dogterom M
 ↵
 ↵
 ↵
 Drechsel DN,
 Hyman AA,
 Cobb MH,
 Kirschner MW
 ↵
 Walker RA,
 Pryer NK,
 Salmon ED
 ↵
 ↵
 Garner EC,
 Campbell CS,
 Mullins RD
 ↵
 Papoulis A,
 Pillai SU
 ↵
 Chretien D,
 Fuller SD,
 Karsenti E
 ↵
 Berg HC
 ↵
 ↵
 ↵
 Rice LM,
 Montabana EA,
 Agard DA
 ↵
 ↵
 ↵
 Foethke D,
 Makushok T,
 Brunner D,
 Nédélec F
 ↵
 Dimitrov A,
 et al.
Citation Manager Formats
Sign up for Article Alerts
Jump to section
You May Also be Interested in
More Articles of This Classification
Biological Sciences
Cell Biology
Related Content
 No related articles found.
Cited by...
 A role for longrange, throughlattice coupling in microtubule catastrophe
 A structural mechanochemical model for dynamic instability of microtubule
 Microtubule aging probed by microfluidicsassisted tubulin washout
 GDPtoGTP exchange on the microtubule end can contribute to the frequency of catastrophe
 Cytoplasmic Volume Modulates Spindle Size During Embryogenesis
 The mechanisms of microtubule catastrophe and rescue: implications from analysis of a dimerscale computational model
 What's all the noise about developmental stochasticity?