## New Research In

### Physical Sciences

### Social Sciences

#### Featured Portals

#### Articles by Topic

### Biological Sciences

#### Featured Portals

#### Articles by Topic

- Agricultural Sciences
- Anthropology
- Applied Biological Sciences
- Biochemistry
- Biophysics and Computational Biology
- Cell Biology
- Developmental Biology
- Ecology
- Environmental Sciences
- Evolution
- Genetics
- Immunology and Inflammation
- Medical Sciences
- Microbiology
- Neuroscience
- Pharmacology
- Physiology
- Plant Biology
- Population Biology
- Psychological and Cognitive Sciences
- Sustainability Science
- Systems Biology

# Realization of a Knill-Laflamme-Milburn controlled-NOT photonic quantum circuit combining effective optical nonlinearities

Edited by Alain Aspect, Institut d'Optique, Orsay, France, and approved May 5, 2011 (received for review December 21, 2010)

## Abstract

Quantum information science addresses how uniquely quantum mechanical phenomena such as superposition and entanglement can enhance communication, information processing, and precision measurement. Photons are appealing for their low-noise, light-speed transmission and ease of manipulation using conventional optical components. However, the lack of highly efficient optical Kerr nonlinearities at the single photon level was a major obstacle. In a breakthrough, Knill, Laflamme, and Milburn (KLM) showed that such an efficient nonlinearity can be achieved using only linear optical elements, auxiliary photons, and measurement [Knill E, Laflamme R, Milburn GJ (2001) *Nature* 409:46–52]. KLM proposed a heralded controlled-NOT (CNOT) gate for scalable quantum computation using a photonic quantum circuit to combine two such nonlinear elements. Here we experimentally demonstrate a KLM CNOT gate. We developed a stable architecture to realize the required four-photon network of nested multiple interferometers based on a displaced-Sagnac interferometer and several partially polarizing beamsplitters. This result confirms the first step in the original KLM “recipe” for all-optical quantum computation, and should be useful for on-demand entanglement generation and purification. Optical quantum circuits combining giant optical nonlinearities may find wide applications in quantum information processing, communication, and sensing.

Several physical systems are being pursued for quantum computing (1)—promising candidates include trapped ions, neutral atoms, nuclear spins, quantum dots, superconducting systems, and photons—while photons are indispensable for quantum communication (2, 3) and are particularly promising for quantum metrology (4, 5). In addition to low-noise quantum systems (typically two-level “qubits”) quantum information protocols require a means to interact qubits to generate entanglement. The canonical example is the controlled-NOT (CNOT) gate, which flips the state of the polarization of the “target” photon conditional on the “control” photon being horizontally polarized (the logical “1” state). The gate is capable of generating maximally entangled two-qubit states, which together with one-qubit rotations provide a universal set of logic gates for quantum computation.

The low-noise properties of single photon qubits are a result of their negligible interaction with the environment, however, the fact that they do not readily interact with one-another is problematic for the realization of a CNOT or other entangling interaction. Consequently it was widely believed that matter systems, such as an atom or atom-like system (6), or an ensemble of such systems (7), would be required to realize such efficient optical nonlinearities. Indeed the first proposals for using linear optics to benchmark quantum algorithms require exponentially large physical resources (8–10).

In 2001, KLM made the surprising discovery that a scalable quantum computer could be built from only linear optical networks, and single photon sources and detectors (11). In fact, it was even surprising to KLM themselves, as they had initially intended to prove the opposite. The KLM recipe consists of two parts: an optical circuit for a CNOT gate using linear optics, single photon sources (12), and photon number-resolving detectors (13); and a scheme (14, 15) for increasing the success probability of this CNOT gate (*P* = 1/16) arbitrarily close to unity, where the probabilistic CNOT gates generate the entangled states used as a resource for the implementation of controlled unitary operation based on quantum teleportation (16, 17). This discovery opened the door to linear optics quantum computation and has spurred world-wide theoretical and experimental efforts to realize such devices (18), as well as new quantum communication schemes (2) and optical quantum metrology (5). Inspired by the KLM approach, a number of quantum logic gates using heralded photons and event postselection have been proposed and demonstrated (19–28). Furthermore, optical quantum circuits combining these gates have been demonstrated (29–33). In this context, photonic quantum information processing using linear optics and postselection is one of the promising candidates in the quest for practical quantum information processing (18).

## Knill-Laflamme-Milburn C-NOT Gate

Interestingly, none of these gates realized so far (19–28) actually used the original KLM proposal of a simple measurement-induced nonlinearity: either the gates are not heralded (the resultant output photons themselves have to be measured and destroyed) or rely on additional entanglement effects; as we explain below, the KLM scheme is based on a direct implementation of the nonlinear sign-shift (NS) gate that relies on the interaction with a single auxiliary photon at a beam splitter (BS). The NS gate is thus based on the efficient optical nonlinearity induced by single photon sources and detectors. While a measurement-induced nonlinearity has been verified by a conditional phase shift for one specific input (21), the complete function of a NS gate for arbitrary inputs has not been demonstrated. Moreover, it is an important remaining challenge to combine the nonlinearities into a network such as the KLM-CNOT gate, because this requires a more reliable control of optical coherence than a nonlinearity acting on a single beam, especially because nonlinearities tend to couple modes to produce additional and often unexpected noise patterns. Specifically, it is a difficult task to implement the nested interferometers needed to perform the multiple classical and quantum interferences that form the elements of the quantum gate operation, which has prevented the realization of the KLM-CNOT gate.

The key element in the KLM CNOT gate is the nondeterministic NS gate (Fig. 1*A*), which operates as follows: When a superposition of the vacuum state |0〉, one photon state |1〉 and two-photon state |2〉 is input into the NS gate, the gate flips the sign (or phase) of the probability amplitude of the |2〉 component: |*ψ*〉 = *α*|0〉+*β*|1〉+*γ*|2〉 → |*ψ*^{′}〉 = *α*|0〉+*β*|1〉-*γ*|2〉. Note that this operation is nondeterministic—it succeeds with probability of *P* = 1/4—however, the gate always gives a signal (photon detection) when the operation is successful.

## The Nonlinear Sign-Shift Gate

A CNOT gate can be constructed from two NS gates as shown schematically in Fig. 2*A* (11). Here the control and target qubits are encoded in optical mode or path (“dual-rail encoding”), with a photon in the top mode representing a logical 0 and in the bottom a logical 1. The target modes are combined at a 1/2 reflectivity BS (BS3), interact with the control 1 mode via the central Mach-Zehnder interferometer (MZ), and are combined again at a 1/2 reflectivity BS (BS4) to form another MZ with the two target modes, whose relative phase is balanced such that, in the absence of a control photon, the output state of the target photon is the same as the input state. The goal is to impart a *π* phase shift in the upper path of the target MZ, conditional on the control photon being in the 1 state such that the NOT operation will be implemented on the target qubit. When the control input is 1, quantum interference (34) between the control and target photons occurs at BS1: |1〉_{C1}|1〉_{T0} → |2〉_{C1}|0〉_{T0} - |0〉_{C1}|2〉_{T0}. In this case the NS gates each impart a *π* phase shift to these two-photon components: |2〉_{C1/T0} → -|2〉_{C1/T0}. At BS2 the reverse quantum interference process occurs, separating the photons into the *C*_{1} and *T*_{0} modes, while preserving the phase shift that was implemented by the NS gates. In this way the required *π* phase shift is applied to the upper path of the target MZ, and so CNOT operation is realized.

An NS gate can be realized using an optical circuit consisting of three beam splitters, one auxiliary single photon, and two-photon number-resolving detectors (Fig. 1*B*) (11). The NS gate is successful, i.e., |*ψ*〉 → |*ψ*^{′}〉, when one photon is detected at the upper detector and no photons at the lower detector. This outcome occurs with probability 1/4 and so the success probability of the CNOT gate is (1/4)^{2} = 1/16.

The key to NS gate operation is multiphoton quantum interference, which can be understood by considering the simplified NS gate shown in Fig. 1*C* (35). The probability amplitude for one photon to be detected at the output detector (which is the success signal) can be calculated by summing up the amplitudes of the indistinguishable processes leading to this result: For the |0〉 input only reflection of the auxiliary photon contributes and the amplitude is simply given by , where *R* is the reflectivity of the beamsplitter. For the |1〉 input the total probability amplitude 1 - 2*R* is given by the sum of the probability amplitudes for two photons to be reflected (-*R*) and two photons to be transmitted (1 - *R*). Finally for the |2〉 input the probability amplitude is . This probability amplitude shows that nonlinear sign flip of the |2〉 term, required for NS gate operation, is possible for any *R* < 2/3, however, the amplitudes of the |0〉, |1〉 and |2〉 components are also modified by the operation, which is not desired. In the original NS gate (Fig. 1*B*), the path interferometer is used to balance these amplitudes. To preserve these amplitudes in the case where the simplified NS gates are used small losses (0.24 for *R* = 0.23 in Fig. 1*C*) should be deliberately introduced in the output using BS9 and BS10 in Fig. 2*B* (35), at the cost of reducing the success probability slightly (from 0.25 to 0.23), but with the benefit of removing the need for the interferometer in the NS gates. Even with this simplification significant technical difficulties remain: nested interferometers, two auxiliary photons, and several classical and quantum interference conditions.

## Experimental Implementation of the KLM C-NOT Gate

We designed the inherently stable architecture shown in Fig. 2*D* to implement the KLM CNOT gate of Fig. 2*B*, using polarization to encode photonic qubits. This design takes advantage of two recent photonic quantum circuit techniques: partially polarizing beam splitters (24–26, 29) (PPBSs), which results in the circuit shown in Fig. 2*C*, and the displaced-Sagnac architecture (5, 29), which results in the circuit shown in Fig. 2*D*. The PPBSs have a different reflectivity *R* and transmissivity *T* for horizontal *H* and vertical *V* polarizations. We used three kinds of PPBSs: PPBS1 (*R*_{H} = 50%, *R*_{V} = 100%), PPBS2 (*R*_{H} = 23%, *R*_{V} = 100%), and PPBS3 (*T*_{H} = 76%, *T*_{V} = 100%). The control (*C*) and target (*T*) photons are first incident on PPBS1 (first PPBS1 in Fig. 2*C*) where two-photon quantum interference transfers pairs of *H*-polarized photons to the same output port by photon bunching. The outputs are then routed to PPBS2 (two PPBS2s in Fig. 2*C*), where quantum interferences of the *H* components with two auxiliary horizontally polarized photons induce the effective nonlinearity. The photons then return to PPBS1 (second PPBS1 in Fig. 2*C*) where a final quantum interference reverses the initial operation of PPBS1, separating pairs of *H*-polarized photons into separate outputs. The PPBS3 at each of the outputs (PPBS3s in Fig. 2*C*) balance the output polarization components. To characterize the operation of the gate, the output modes *C*_{out} and *T*_{out} were detected by the photon counters (DC and DT) with polarization analyzers. Note that all the four polarization modes of the control and target photons pass through all the optical components inside the interferometer so that the path difference between those four polarization modes are robust to drifts or vibrations of these optical components.

We used four photons generated via type-I spontaneous parametric down-conversion. The pump laser pulses (76 MHz at 390 nm, 200 mW) pass through a beta-barium borate crystal (1.5 mm) twice to generate two pairs of photons. One pair was used as the *C* and *T* qubits, and the other as the auxiliary photons A1 and A2. We first checked the quality of quantum interference (34) between a *C*/*T* photon and an auxiliary photon at PPBS2. For example, to test the interference between *C* and A1, we detected photons *T* and A2 just after the photon source to herald photons *C* and A1, respectively, and measured the simultaneous single photon detection counts between detectors DC and DA1 while scanning the arrival time of the *C* photon. Note that the reflectivity of PPBS2 for horizontal polarization is 23% and thus the visibility for perfect interference is *V*_{th} = 54%, rather than 100% in the case of a 50% reflectivity BS. The visibility *V*_{exp} of the observed dips are 48 ± 4% and 49 ± 3% (with bandpass filters of center wavelength 780 nm and FWHM 2 nm), corresponding to relative visibilities of *V*_{r} ≡ *V*_{exp}/*V*_{th} = 89% and 91%. To test the performance of our CNOT gate circuit, we used coincidence measurements between the four threshold detectors at DA1, DA2, DC, and DT rather than using photon number discriminating detectors for DA1 and DA2 and loss detection at PPBS3s because we needed to analyze the polarization state of the output to confirm correct operation. We performed this polarization analysis using a half-wave plate (HWP in Fig. 2*D*) or quarter-wave plate (QWP in Fig. 2*D*) together with a polarizing beam splitter (PBS).

## Experimental Results

We first checked the “logical basis” operation of the CNOT gate by preparing *C* and *T* in the four combinations of |0〉 and |1〉 (the *ZZ* basis states) and measured the probability of detecting these *ZZ* states in the output for each input state, to generate the “truth table” shown in Fig. 3*A*. The experimental data show the expected CNOT operation, i.e., the *T* photon’s state is flipped only when the *C* qubit is 1. The (classical) fidelity of this process *F*_{ZZ→ZZ}, defined as the ratio of transmitted photon pairs in the correct output state to the total number of transmitted photon pairs, is 0.87 ± 0.01.

Because almost all the errors conserve horizontal/vertical polarization, the process fidelity *F*_{P} of the quantum coherent gate operation can be determined from the fidelities obtained from only three sets of orthogonal input- and output states (see *Appendix: Derivation of the Process Fidelity*),[1]The measurement result of the input-output probabilities in the *XX* basis are shown in Fig. 3*B*, where the basis states are ; the fidelity is *F*_{XX→XX} = 0.88 ± 0.02. To obtain *F*_{XZ→YY}, we detected the *YY* basis output from *XZ* basis inputs, as shown in Fig. 3*C*. The *Y* basis states are . The fidelity is *F*_{XZ→YY} = 0.81 ± 0.02. Using Eq. **1**, we find a process fidelity of *F*_{P} = 0.78.

A more intuitive measure of how all other possible gate operations (input and output states) perform is given by the average gate fidelity , which is defined as the fidelity of the output state averaged over all possible input states. This measure of the gate performance is related to the process fidelity by (36, 37) [2]where *d* is the dimension of the Hilbert space (*d* = 4 for a 2 qubit gate). Based on Eqs. **1** and **2**, our results show that the average gate fidelity of our experimental quantum CNOT gate is .

## Discussion

The data presented above confirm the realization of the CNOT gate proposed by KLM, which is an optical circuit combining a pair of efficient nonlinear elements induced by measurement. This result confirms the first step in the KLM recipe for all-optical quantum computation and illustrates how efficient nonlinearities induced by measurement can be utilized for quantum information science; such measurement-induced optical nonlinearities could also be an alternative to nonlinear media used for quantum nondemolition detectors (39) or photonic pulse shaping (40). By emulating fundamental nonlinear processes, such measurement-induced optical nonlinearities can also improve our understanding of the quantum dynamics in nonlinear media. Conversely, future technical progress may permit the replacement of these effective optical nonlinearities in the network by approaches based on nonlinearities in material systems such as atoms (6), solid state devices (41), hybrid systems (42), or optical fiber Kerr nonlinearities (43). In this context, our demonstration provides an experimental test for quantum networks based on nonlinear optical elements and may serve as a reference point for comparisons with future networks using other optical nonlinearities. In particular, the present results may be useful as a starting point for a more general analysis of quantum error propagation in nonlinear optical networks. Our device will be useful for conventional and cluster state approaches to quantum computing (38), as well as quantum communication (2), and optical quantum metrology (5). This circuit could be implemented using an integrated waveguide architecture (28), in which case a dual-rail encoding could conveniently be used.

In the present tests of the performance of CNOT gate operation, we used threshold detectors to monitor the output state. For applications in which the output state cannot be monitored, high-efficiency number-resolving photon detectors (13) could be used at DA1 and DA2 to generate the heralding signals. We also used spontaneous parametric fluorescence as single photon sources. Note that alternative approaches that do not follow the KLM recipe as closely can be useful for scalable linear optics quantum information processing (18). For all these approaches, further progress in on-demand single photon sources and practical photon resolving detectors will be crucial to ensure reliable operation.

## Appendix: Derivation of the Process Fidelity

The PPBSs used to realize the KLM CNOT gate preserve the horizontal/vertical polarization with high fidelity. In the quantum CNOT operation, these polarizations correspond to the *ZX*-basis of the qubits. In the data shown in Fig. 3, this means that the number of flips observed for the control qubit in Fig. 3*A* and for the target qubit in Fig. 3*B* are negligibly small, i.e., 0 error event and only 1 error event respectively over 943 total events. We can therefore describe the errors of the quantum gate in terms of dephasing between the *ZX*-eigenstates. In terms of the operator expansion of errors, we can define the correct operation and three possible phase flip errors as [3]The operation of the gate can then be written as [4]where *n*, *m*∈{gate,*T*,*C*,*CT*}, and *χ*_{nm} define the process matrix of the noisy quantum process.

Each of our experimentally observed truth table operations *i* → *j* is correctly performed by and one other operation . Therefore, the fidelities *F*_{i→j} can be given by the sums of the probability *F*_{p} = *χ*_{gate,gate} for the correct operation and the probabilities *η*_{n} = *χ*_{nn} for the errors as follows. [5]Note that these relations between the diagonal elements of the process matrix and the experimentally observed fidelities can also be derived from Eq. **4** using the formal definition of the experimental fidelities. In this case the fidelities are determined by the sums over the correct outcomes |(*j*)_{l}〉 in *E*(|(*i*)_{k}〉〈(*i*)_{k}|), averaged over all inputs |(*i*)_{k}〉, [6]Here *k*, *l*∈{1,2,3,4}, and (*i*)_{k} denote the *k* th state of the *i* basis states. For example, |(*i*)_{1}〉 = |*VV*〉, |(*i*)_{2}〉 = |*VH*〉, |(*i*)_{3}〉 = |*HV*〉, |(*i*)_{4}〉 = |*HH*〉 for *i* = *ZX*. The sums over initial states *k* and final states *l* are one for *n* = *m* = 0 and for a single other error, *n* = *m* = *n*(*ij*). All remaining sums are zero, confirming the results in Eq. **5**).

Because the diagonal elements of the process matrix correspond to the probabilities of the orthogonal basis operations, their sum is normalized to one, so that . It follows that the sum of all three experimentally determined fidelities is *F*_{ZZ→ZZ} + *F*_{XX→XX} + *F*_{XZ→YY} = 2*F*_{p} + 1. Therefore, the process fidelity of our KLM CNOT gate is given by [7]This number clearly exceeds the threshold *F*_{p}≥0.5 for the gate to produce entanglement—a key quantum operation of the gate. The fidelity of the output states of the gate, averaged over all input states is related to the process fidelity [8]where *d* is the dimension of the Hilbert space (*d* = 4 for a two-qubit gate).

## Acknowledgments

We thank T. Nagata and M. Tanida for help and discussions. This work was supported in part by Quantum Cybernetics project, the Japan Science and Technology Agency (JST), Ministry of Internal Affairs and Communication (MIC), Japan Society for the Promotion of Science (JSPS), 21st Century Center of Excellence (COE) Program, Special Coordination Funds for Promoting Science and Technology, Daiwa Anglo-Japanese Foundation, European Research Council (ERC), Engineering and Physical Sciences Research Council (EPSRC), and Leverhulme Trust. J.L.O’B. acknowledges a Royal Society Wolfson Merit Award.

## Footnotes

- ↵
^{1}To whom correspondence should be addressed. E-mail: takeuchi{at}es.hokudai.ac.jp.

Author contributions: R.O., J.L.O’B., H.F.H., and S.T. designed research; performed research; contributed new reagents/analytic tools; analyzed data; and wrote the paper.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.

Freely available online through the PNAS open access option.

## References

- ↵
- ↵
- ↵
- ↵
- Giovannetti V,
- Lloyd S,
- Maccone L

- ↵
- Nagata T,
- Okamoto R,
- O’Brien JL,
- Sasaki K,
- Takeuchi S

- ↵
- ↵
- ↵
- Takeuchi S

- ↵
- Takeuchi S

- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- Gao WB,
- et al.

- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- Politi A,
- Cryan MJ,
- Rarity JG,
- Yu S,
- O’Brien JL

- ↵
- Okamoto R,
- et al.

- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- Resch KJ

- ↵
- Fushman I,
- et al.

- ↵
- ↵

## Citation Manager Formats

## Article Classifications

- Physical Sciences
- Computer Sciences

## Sign up for Article Alerts

## Jump to section

## You May Also be Interested in

_{2.5}in 2011, with a societal cost of $886 billion, highlighting the importance of modeling emissions at fine spatial scales to prioritize emissions mitigation efforts.

### More Articles of This Classification

### Physical Sciences

### Related Content

- No related articles found.