Fate of MgSiO3 melts at core–mantle boundary conditions
- aBayerisches Geoinstitut, University of Bayreuth, Bayreuth D-95490, Germany;
- bLaboratory for Building Energy Materials and Components, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland;
- cEuropean Synchrotron Radiation Facility, BP 220, Grenoble F-38043, France;
- dConditions Extrêmes et Matériaux: Haute Température et Irradiation, CNRS UPR 3079, Université d'Orléans, 45071 Orléans Cedex 2, France;
- eAnalytical Mineralogy of Micro- and Nanostructures, Institute of Geoscience, Friedrich Schiller University Jena, Jena 07745, Germany;
- fDepartment of Analytical Chemistry, Ghent University, B-9000 Ghent, Belgium
See allHide authors and affiliations
Edited by Russell J. Hemley, Carnegie Institution of Washington, Washington, DC, and approved October 7, 2015 (received for review June 25, 2015)

Significance
A new technique has been developed to measure in situ the density of amorphous material composed of light elements under extreme conditions of pressure using the X-ray absorption method. At core–mantle boundary (CMB) pressure, the densities of MgSiO3 glass and melts are similar to the one of the crystalline bridgmanite, within uncertainty. Due to the affinity of iron oxide for silicate liquids, melting in the MgSiO3–FeSiO3 system will produce dense melts that could accumulate above the CMB, leading to the formation of a dense basal magma ocean in the early Earth's mantle.
Abstract
One key for understanding the stratification in the deep mantle lies in the determination of the density and structure of matter at high pressures, as well as the density contrast between solid and liquid silicate phases. Indeed, the density contrast is the main control on the entrainment or settlement of matter and is of fundamental importance for understanding the past and present dynamic behavior of the deepest part of the Earth’s mantle. Here, we adapted the X-ray absorption method to the small dimensions of the diamond anvil cell, enabling density measurements of amorphous materials to unprecedented conditions of pressure. Our density data for MgSiO3 glass up to 127 GPa are considerably higher than those previously derived from Brillouin spectroscopy but validate recent ab initio molecular dynamics simulations. A fourth-order Birch–Murnaghan equation of state reproduces our experimental data over the entire pressure regime of the mantle. At the core–mantle boundary (CMB) pressure, the density of MgSiO3 glass is 5.48 ± 0.18 g/cm3, which is only 1.6% lower than that of MgSiO3 bridgmanite at 5.57 g/cm3, i.e., they are the same within the uncertainty. Taking into account the partitioning of iron into the melt, we conclude that melts are denser than the surrounding solid phases in the lowermost mantle and that melts will be trapped above the CMB.
Footnotes
- ↵1To whom correspondence should be addressed. Email: sylvain.petitgirard{at}uni-bayreuth.de.
Author contributions: S.P. and W.J.M. designed research; S.P., W.J.M., R.S., I.K., T.D., and M.B. performed research; S.P., L.H., and D.H. contributed new reagents/analytic tools; S.P. and W.J.M. analyzed data; and S.P., W.J.M., R.S., and D.C.R. wrote the paper.
The authors declare no conflict of interest.
This article is a PNAS Direct Submission.
This article contains supporting information online at www.pnas.org/lookup/suppl/doi:10.1073/pnas.1512386112/-/DCSupplemental.
Freely available online through the PNAS open access option.
Citation Manager Formats
Article Classifications
- Physical Sciences
- Earth, Atmospheric, and Planetary Sciences