## New Research In

### Physical Sciences

### Social Sciences

#### Featured Portals

#### Articles by Topic

### Biological Sciences

#### Featured Portals

#### Articles by Topic

- Agricultural Sciences
- Anthropology
- Applied Biological Sciences
- Biochemistry
- Biophysics and Computational Biology
- Cell Biology
- Developmental Biology
- Ecology
- Environmental Sciences
- Evolution
- Genetics
- Immunology and Inflammation
- Medical Sciences
- Microbiology
- Neuroscience
- Pharmacology
- Physiology
- Plant Biology
- Population Biology
- Psychological and Cognitive Sciences
- Sustainability Science
- Systems Biology

# Convergence in the temperature response of leaf respiration across biomes and plant functional types

Edited by William J. Bond, University of Cape Town, Cape Town, South Africa, and approved February 18, 2016 (received for review October 13, 2015)

### This article has a Letter. Please see:

### See related content:

- Temperature response of respiration- Oct 04, 2016

## Significance

A major concern for terrestrial biosphere models is accounting for the temperature response of leaf respiration at regional/global scales. Most biosphere models incorrectly assume that respiration increases exponentially with rising temperature, with profound effects for predicted ecosystem carbon exchange. Based on a study of 231 species in 7 biomes, we find that the rise in respiration with temperature can be generalized across biomes and plant types, with temperature sensitivity declining as leaves warm. This finding indicates universally conserved controls on the temperature sensitivity of leaf metabolism. Accounting for the temperature function markedly lowers simulated respiration rates in cold biomes, which has important consequences for estimates of carbon storage in vegetation, predicted concentrations of atmospheric carbon dioxide, and future surface temperatures.

## Abstract

Plant respiration constitutes a massive carbon flux to the atmosphere, and a major control on the evolution of the global carbon cycle. It therefore has the potential to modulate levels of climate change due to the human burning of fossil fuels. Neither current physiological nor terrestrial biosphere models adequately describe its short-term temperature response, and even minor differences in the shape of the response curve can significantly impact estimates of ecosystem carbon release and/or storage. Given this, it is critical to establish whether there are predictable patterns in the shape of the respiration–temperature response curve, and thus in the intrinsic temperature sensitivity of respiration across the globe. Analyzing measurements in a comprehensive database for 231 species spanning 7 biomes, we demonstrate that temperature-dependent increases in leaf respiration do not follow a commonly used exponential function. Instead, we find a decelerating function as leaves warm, reflecting a declining sensitivity to higher temperatures that is remarkably uniform across all biomes and plant functional types. Such convergence in the temperature sensitivity of leaf respiration suggests that there are universally applicable controls on the temperature response of plant energy metabolism, such that a single new function can predict the temperature dependence of leaf respiration for global vegetation. This simple function enables straightforward description of plant respiration in the land-surface components of coupled earth system models. Our cross-biome analyses shows significant implications for such fluxes in cold climates, generally projecting lower values compared with previous estimates.

Plant respiration provides continuous metabolic support for growth and maintenance of all tissues and contributes ∼60 Pg C y^{−1} to the atmosphere (1, 2), with ∼50% of the carbon (C) released by whole-plant respiration from leaves (3). As rates of leaf respiration (*R*) vary substantially with changes in temperature (*T*) (4, 5), even slight increases in ambient *T* can lead to increases in the flux of carbon dioxide (CO_{2}) from leaves to the atmosphere. This has the potential to create concomitant decreases in net primary productivity, and affect the implications of fossil fuel burning by contributing additionally to atmospheric CO_{2} levels due to any imposed surface-level global warming. Hence, quantification of the *T* response of leaf *R*, and how this response may vary across diverse ecosystems and plant species, is critical to current estimations and future projections of the global carbon cycle (6⇓–8). Evaluating how leaf *R* relates to *T* in terrestrial plants will clarify fundamental controls on energy metabolism and enable more accurate parameterization, as leaf *R*, in addition to photosynthesis (9, 10), has been identified as a major source of uncertainty in models of the global carbon cycle (8, 11). The response of leaf *R* to *T* differs in both magnitude and mechanism with time scale (5); herein, we address how the fundamental short-term response (minutes to hours) varies among plant species and biomes globally.

The short-term *T* response of leaf *R* is strongly regulated by the *T* dependence of the reaction rates of enzymes involved in a variety of respiratory pathways in the cytosol and mitochondria within plant cells (5, 12). Given that these many processes influence the realized rates of leaf *R* across broad ranges in *T*, the *T* dependence of *R* might be expected to vary widely among contrasting thermal regimes and environments, or among species that differ in metabolic capacity or life span. For example, *R–T* relations could vary predictably, according to plant functional types (PFTs; groupings of plant species by life history attributes, growth strategies and/or geographic location), or with variation corresponding with types that differ in rates of net photosynthetic CO_{2} uptake and potential growth rates (e.g., fast-growing herbs versus slower-growing trees). A key issue, therefore, is whether the *T* dependence of leaf *R* has spatially invariant features across the earth’s surface, or instead varies as a consequence of genotypic and multiple environmental factors. This is critically important, as the global estimation of leaf *R* is a significant uncertainty in terrestrial biosphere models (TBMs) and associated land-surface components of earth system models (ESMs). The latter quantify the global carbon cycle now and project it into the future (8, 11), including feedbacks as a consequence of anthropogenic emissions of CO_{2} on climate.

Although it has been known for over a century that the near-instantaneous increase in plant *R* with rising *T* is nonlinear (13, 14), there has been uncertainty whether a single general form for the leaf *R*–*T* relationship applies both phylogenetically and biogeographically (15⇓–17). A widely adopted physiological model framework (18, 19) assumes that *R* exhibits an exponential response to *T*, with *R* roughly doubling with every 10 °C rise in *T* (corresponding to a fixed “*Q*_{10}-type” formulation, with *Q*_{10} ∼ 2.0). However, it has long been recognized that the *Q*_{10} is often not constant nor close to 2.0 except over a limited *T* range (14, 20), and this pattern is consistent when also considering ecosystem respiration (21). For this reason, alternative models have been developed, including modified Arrhenius formulations, universal temperature dependence (UTD), and *T*-dependent *Q*_{10} functions (15⇓–17, 22). All of these models attempt to address the shortcomings of an exponential model that provides a fixed *T*-sensitivity term across a wide range of temperatures. Here, we evaluate a comprehensive set of empirical, thermally high-resolution *T*-response curves for multiple taxa and environments. Doing so enables a full assessment of the suitability of these quantitative physiological models in accurately representing the variation in the observed short-term *R*–*T* relationship, and implications of the short-term response in different seasons. We aim to significantly improve how the short-term *R*–*T* response is represented, and recognize this is one element of a complex and dynamic process. As leaf *R* is also impacted by acclimation to sustained changes in growth *T*, future modeling work will determine the effect of a more accurate short-term *T* response applied in concert with recent advances in modeling basal rates of leaf *R* (23) and longer-term (weeks to months) acclimation of *R* to changing growth *T*s (24, 25).

Physiological model representations of leaf respiratory *T* responses vary in complexity and in their ability to account for observed biological patterns, such as decreases in the *T* sensitivity of *R* over increasing *T*s (5, 17) (see *Supporting Information* for model descriptions and Figs. S1 and S2). Modification of the *T* sensitivity of leaf *R* (based on ref. 16) in TBMs and the associated land-surface component of ESMs results in significant alterations to modeled carbon fluxes (8, 26), demonstrating the high sensitivity of the carbon cycle simulations to the *R–T* function, and thus the need to improve our understanding and quantification of this relationship. The evidence for apparent complexity in the leaf *R–T* response (16, 27) and consequences for carbon cycling indicates both the need for, and, opportunity to improve quantification of the leaf *R*–*T* relationship in globally widespread, but thermally contrasting, biomes. Here, we report on filling that critical knowledge gap.

The goals of our study are threefold: (*i*) to quantify the *T* response of leaf *R* through use of a new and comprehensive set of thermally high-resolution field measurements of leaf *R* across large *T* ranges for each leaf; (*ii*) to assess the shape of *T*-response curves in leaves of species representing diverse environments and PFTs; and (*iii*) to assess the implications of altered *T* sensitivity of *R* for simulated carbon fluxes using the land-surface component of a leading ESM (28). Using methods (27) that enabled high-resolution measurement of the *T* dependence of leaf *R* in leaves, we present results from 673 short-term *T*-response curves of 231 species collected in situ across 18 sites representing contrasting biomes, geographical locations, and PFTs (Table S1). Based on this unprecedented dataset of standardized physiological measurements, we provide evidence of a global, fundamental *T* response of leaf *R* in terrestrial plants and thus a mathematical model that outperforms alternative representations of how leaf *R* responds to *T*. We also show that in cross-biome analyses, application of this mathematical model significantly alters simulated carbon fluxes, particularly in cold climate ecosystems.

## Results

### Evaluating Temperature Response Models.

Our data of high-resolution measurement of the *T* response of leaf *R* enabled a comparison of commonly applied quantitative physiological models to determine which offered the best fit for replicate response curves across the entire 10–45 °C range. A comparison of residuals from model estimates for all individual leaf response curves for five models (exponential fixed-*Q*_{10}, Arrhenius, Lloyd & Taylor, variable-*Q*_{10}, and second-order log-polynomial function; *Supporting Information*) demonstrates that a second-order log-polynomial model best characterized the *T* response of *R* (Fig. S2*A*). This selection is made on the basis that the polynomial model had the best projections of leaf *R* against data from over the entire *T* range, has a straightforward application, and is independent from biological assumptions about activation energies; we applied this approach to all measured response curves that collectively comprise the total mean response (Fig. S2*B*). Accordingly, to best represent our high-resolution leaf *R* measurements quantitatively, all individual leaf *T*-response curve data were natural-log–transformed (*ln*) and to those values, a second-order polynomial model was fitted as:*R* is the rate at a given leaf *T*, and *a*, *b*, and *c* are coefficients that provided the fit that minimized residuals.

The application of a polynomial model fit to high-resolution *ln R*–*T* response curves provides a three-parameter description of leaf *R* across the *T* range. The *a* parameter, which indicates *ln R* at 0 °C, determines a reference value offset of the response curve. The *b* parameter—the slope of *ln R* vs. *T* plot at 0 °C—and the *c* parameter, which represents any quadratic nonlinearity in *ln R* vs. *T* slope with increasing measuring *T*, are both key to describing the fundamental shape of the short-term *T* response of leaf *R*. To assess the influence of site environment and plant form, we analyzed the variation in values of each model parameter, *a*, *b*, and *c* for diverse biomes and PFTs based on individual leaf sample curves. We calculated this variation for both the entire measured *T* range (10–45 °C), as well as for shorter, discrete segments (i.e., 15–25 °C) of the entire measured *T* range, to evaluate potential influence of measurement *T* range on these parameters. No difference was found between the parameters calculated from shorter, discrete *T* ranges and the entire measurement *T* range, (Tables S2 and S3, Fig. S3), further justifying the applicability of the polynomial function for this response. Together, mean values of *a*, *b*, and *c* parameters create data-derived equations for leaf *R* that clearly mirror observed mean respiratory responses aggregated for discrete levels of the two corresponding factors (i.e., biome or PFT; Fig. 1). This approach can also fully capture the deceleration of rates of *R* observed as *T*s increase (Figs. 1 and S1), clearly demonstrating the utility of the polynomial formulation for creating realistic models of leaf *R*.

### Comparison Among Biomes and Plant Functional Types.

Mean species values for the polynomial model parameters (*a, b*, and *c*) at each site were statistically compared by biome and PFTs using a nested mixed-model approach (Table 1). The curves presented in Fig. 1 show that rates of leaf *R* at a common *T* were highest in the coldest biomes (i.e., higher *a* values for tundra and high-altitude tropical rainforests). By contrast, low-altitude tropical forests, the warmest biome included in this study (Table S1), exhibited the lowest value of parameter *a* and the lowest values of leaf *R* over the measurement ranges of *T* (Fig. 1 *A* and *B*). Similarly, variation in leaf *R* at a common *T* was found among PFTs (Fig. 1 *C* and *D*).

In strong contrast to large differences across biomes and PFTs in leaf *R* at a common measurement *T*, we found that the rise in *R* with *T* as leaves warm follows a remarkably consistent function, suggesting more universal values of parameters *b* and *c*. Fig. 1 illustrates the common shape of the response curve to leaf *T* that is almost invariant across plants, despite representing highly diverse growth environments and functional groups. This low variation across species means of both *b* and *c* parameters is present when grouped by either biome or PFT (Table 1).

Based on our observation of a near-universal shared response shape of leaf *R* to *T*, we determined the parameters for our global polynomial *R–T* model (GPM) of Eq. **1**. The mean polynomial model parameter values for all species included in our study were: *b =* 0.1012 and *c = −*0.0005, which generate the GPM:*ln R* and *a* are as defined for Eq. **1**. This equation is an empirically based mathematical model of the instantaneous *T* response of leaf *R* (Fig. 2*A*). Average leaf *R* for all study species across the 10–45° *T* range (within 1 °C temperature bins; untransformed global mean response in Fig. S2*B*)—the “global mean data”—can be effectively summarized by the GPM (Fig. 2*A*). Values of *a* do, however, vary significantly across PFTs, shifting the curve of Eq. **2**; thus, the *a* parameter value should be appropriately assigned in the GPM to fit the model’s application, using a rate measured at a known *T* or values from our global survey (Dataset S1).

The input of a known value of leaf *R* (*R*_{Tref} in the below equation), measured at a *T* (*T*_{ref} in the below equation) with the universal *b* and *c* response curve parameters can be applied to a derivation of our GPM to predict values of leaf *R* (*R*_{T}) at a desired *T*, according to:*R*_{Tref} = exp (*a* + 0.1012*T*_{ref} − 0.0005*T*_{ref}^{2}). This equation incorporates the common intrinsic *T* sensitivity of respiration (i.e., response curve shape) observed from our field measurements, and when combined with measured or assumed rates of *R* at *T*_{ref}, enables prediction of *R* at various *T*s.

The *T* sensitivity of the GPM (Fig. 2*B*), here calculated for illustrative purposes using *Q*_{10} values, shows decreasing sensitivity of leaf *R* with increases in *T.* Up to 35 °C, the decline has similarities to (and a steeper slope than) that reported from more limited data by Tjoelker et al. (16). Moreover, our GPM demonstrates that leaf *R* remains more *T* sensitive at higher leaf *T*s (e.g., near 45 °C) than assessed by Tjoelker et al. (16).

### Impacts on Simulated Annual Respiration.

The consequence of using our GPM in existing global models that exclude acclimation responses to sustained changes in growth *T* is illustrated in Fig. 3, which shows annually averaged rates of leaf *R* for our 18 field sites, comparing Joint U.K. Land Environmental Simulator (JULES) estimates modeled with a *Q*_{10} = 2 with those from our GPM derivation Eq. **3**.

As a sensitivity study, we replaced the derivation of the GPM (Eq. **3**) with the commonly applied fixed *Q*_{10} formulation, setting *Q*_{10} = 2, and compared the two. The difference between annual rates of leaf *R* calculated using either the derived GPM (Eq. **3**) or a fixed *Q*_{10} equation where *Q*_{10} = 2 had almost no impact on at the warm tropical sites (Fig. 3 *A* and *B*); similarly, there was no effect of the GPM on seasonal variations in leaf *R* at the tropical sites (Fig. 3*C*). By contrast, at colder sites, estimates of annual leaf *R* were markedly lower when calculated using the GPM derivation (e.g., 28% lower in Toolik Lake, Alaska, and 10–20% lower in the temperate sites) compared with the fixed *Q*_{10} function (Fig. 3*B*), although recognizing these changes are for generally lower *R* values. At temperate woodland sites with evergreen, long-lived foliage, replacement of a fixed *Q*_{10} of 2.0 model with the GPM had its greatest absolute and proportional effect during the cold months of winter, but negligible effect during summer months when leaf *T* values were near 25 °C. For sites where winters are characterized by winter freezing (and thus where metabolic activity is minimal), use of the GPM reduced estimates of leaf *R* across the entire growing season (Fig. 3*C*).

## Discussion

### Universality of Temperature Response.

Despite the huge diversity in plant growth form and local environment represented in our comprehensive dataset, we find remarkable convergence in the functional form of the response of leaf *R* to *T.* Basal rates of *R* vary widely among biomes and PFTs (Fig. 1), and are known to be related to differences in growth *T*, site aridity, and leaf functional traits (23, 29, 30). That *R* at a given *T* is highest in leaves of arctic tundra plants and lowest in leaves of plants from low-elevation tropical forests (Fig. 1*A*) agrees with the concept that leaf *R* (when measured at a common *T*) is higher in plants grown in colder environments (12), and this pattern can be consistently modeled based on known growth *T*s (23). There is significant variation in the curve offset between PFTs; C_{3} herbs exhibit the highest rates of leaf *R* across the 10–45 °C range (Fig. 1*C*), which is also associated with high rates of leaf *R* at a common leaf nitrogen compared with other PFT groups (23, 29). However, here we show the overall shape of the response curve, and thus intrinsic *T* sensitivity of *R*, does not significantly vary; the only variation is an overall offset of the curve. The consistency in the response of leaf *R* to *T* strongly suggests its universality among C_{3} plants and that the *T* dependencies of underlying enzymatic controls of multiple metabolic pathways are widely conserved, even among the most thermally contrasting biomes on earth. Further, a global, fundamental *T* response can be described in a simple, empirically driven log-polynomial equation, available for incorporating into the land-surface component of ESMs and ready to replace current imperfect representations of the short-term *T* response of leaf *R*. Notably, when implemented in a leading TBM (28) for different geographical regions, this equation significantly reduces annual rates of leaf-level respiration in cold climates. We believe this global short-term leaf *R*–*T* response, when applied in conjunction with data-based models of basal leaf *R* (23) and the acclimation response to longer-term growth *Ts* (24), will have important consequences for predicted rates of ecosystem and global carbon exchange, estimates of future carbon storage in vegetation, predicted concentrations of atmospheric CO_{2}, and impacts of future surface temperatures.

### Utility for Predictive Simulation Models.

Our finding of a universal *T* response provides an opportunity for leaf *R* to be better represented in ecosystem models, TBMs, and associated land-surface components of ESMs. It is well known that the use of a fixed-*Q*_{10} or Arrhenius activation energy leads to inaccuracies in estimations of respiratory efflux, especially at relatively high and low *T*s (5). In particular, Arrhenius-derived functions may overestimate rates at low *T*s and underestimate the decline in *T* sensitivity of *R* (22) (Fig. S1*A*). To date, there has been no consensus or consistent assessment based on comprehensive datasets on how to represent the *T* response of *R* in simulation models (31). Our GPM (Eq. **1**) and its parameterization (Eqs. **2** and **3**) against a massive dataset for *R* is comprised of only three and two coefficients, respectively, and offers a simple, yet robust, approach to calculating the *T* response of *R* in leaves. Importantly, our GPM demonstrates that leaf *R* remains *T* sensitive at high leaf *T*s (e.g., near 45 °C; seen in our Fig. S1*A* compared with variable *Q*_{10} model; ref. 12), which will have important consequences for predicted rates of respiratory CO_{2} efflux at high *T*s, particularly as extreme heat-wave events are predicted to increase in frequency and duration (2).

Application of the GPM requires knowledge of basal rates of leaf *R*, designated by the *a* parameter (Eq. **2**) or measured/assumed rates of *R* at a standard measurement *T = T*_{Ref} (Eq. **3**). In cases where the basal rate of *R* is unknown, we suggest application of specific *a* parameter values representing appropriate PFTs and/or biomes (Table 1) or species (Dataset S1). Alternatively, rates of leaf *R* at common *T*_{Ref} (25 °C) reported in a recent global compilation (23) can be used. We believe future integration of the recent global leaf *R* dataset (23) with the short-term *R–T* response model defined by our GPM and climatically variable estimates of longer-term *T* response of *R* through acclimation will result in a vastly improved representation of leaf *R* across scales.

### Consequences for Terrestrial C Exchange.

Our sensitivity study (Fig. 3) showed that although replacing a fixed *Q*_{10} of 2 with the GPM will have little impact on calculated rates of leaf *R* in lowland tropical forests, impacts are significant for temperate, boreal, and arctic/alpine ecosystems. In such ecosystems, reliance on a fixed *Q*_{10} greatly overestimates annual leaf *R*, which in turn will result in underestimates of net primary productivity (NPP), as generally TBMs estimate NPP by subtraction of total canopy leaf *R* from modeled estimates of gross primary productivity (GPP). Though future model implementations that consider the extent to which leaf *R* acclimates to long-term changes in air *T* across the globe (24, 25) will likely further improve how leaf *R* is represented in TBMs, our findings point to lower rates of modeled respiratory CO_{2} release—and thus possible higher rates of simulated NPP—at sites further away from the equator, compared with current model scenarios. As replacement of a fixed *Q*_{10} formulation with our GPM is likely to have profound effects on estimates of global plant *R* and calculations of NPP, its adoption in ESMs will adjust projections of both contemporary and future carbon storage in vegetation. This includes estimates of PFT composition in TBMs that also calculate biome extent through NPP-dependent competition rules. Furthermore, via influence on atmospheric CO_{2} levels, the GPM will affect estimates of what constitutes “permissible” fossil fuel emissions needed to stay below any warming thresholds that society determines as unsafe to cross. This might include the presently much-debated limit of 2° warming since the preindustrial era (32, 33).

Finally, a priority for environmental science remains the building and operating of ESMs with robust parameterizations, allowing trustworthy forward projections of carbon cycle evolution and assessment of the influence of fossil fuel burning on that cycle and associated implications for future climate change. Plant respiration, and any adjustment to that in response to global warming, places a strong control on earth’s carbon cycle and may modulate human influence on future atmospheric CO_{2} concentrations. The urgency to estimate climate change implies ESMs must be operated routinely, both now and in the future. Computational constraints, combined with limited available data, force a compromise in ESMs where numerical code “lumps” features of terrestrial ecosystems into low numbers of PFTs and relatively general parameterizations. Our study across a massive dataset of leaf *R* measurements, and subsequent testing and fitting to a model of *T* response, shows a remarkable level of invariance between geographical sites and biomes. This provides great encouragement that, for leaf *R* at least, the generality of ESMs can be viewed as a neutral, or perhaps, positive feature.

## Methods

### Field Sites and Species.

Details on the 18 field sites used in our study are provided in *Supporting Information* and Table S1, and a full list of all 231 species included in this study can be found, grouped by site and biome, in Dataset S1.

### High-Resolution Measurements of the Temperature Response of Leaf Respiration.

At each field site, replicate branches of sunlit leaves were used to generate high-resolution *R–T* curves (see *Supporting Information* for details). In brief, whole replicate leaves from these branches, or shoot segments for conifers and small-leaved species, were placed in a *T*-controlled, well-mixed cuvette, and allowed to adapt to darkness for 30 min. Leaf cuvettes were *T* controlled via a thermostatically controlled circulating water bath as in O’Sullivan et al. (27) and Heskel et al. (34), or via a Peltier system (3010-GWK1 Gas-Exchange Chamber; Walz, Heinz Walz GmbH). After the 30-min dark adaption period, the cuvette chamber was cooled to 10 °C. Thereafter, the cuvette chamber was heated continuously at a rate of 1 °C min^{−1} until a maximum rate of respiration was reached (generally leaf *T* between 55 and 70 °C), although only data up to *T* = 45 °C was used in our model. The net release of CO_{2} from leaves was recorded at 30-s intervals. Postmeasurement, each replicate leaf was removed from the cuvette, placed in a drying oven at ∼60 °C for a minimum of 2 d, and weighed afterward, so that rates could be expressed on a dry-mass basis (nmol CO_{2} g^{−1} s^{−1}).

### Quantification of *R–T* curves and Model Comparison.

The 673 *R*–*T* curves collected by the methods described above required thorough quantification for comparison across replicates, species, sites, biomes, and plant functional types. For each replicate *R–T* response curves, we assessed the fits commonly applied *R–T* models, including: (*i*) an exponential model with a fixed-*Q*_{10} across the entire *T* range (though not specifically a fixed *Q*_{10} of 2, as is applied in some biosphere models of *R*); (*ii*) an Arrhenius model; (*iii*) a model of *R* responding to the UTD as defined by Gillooly et al. (15), which contains an activation energy parameter and uses Boltzmann’s constant; (*iv*) a model presented by Lloyd and Taylor (17) to describe the response of soil *R* to *T* that includes a temperature-sensitive activation energy; (*v*) a model that incorporates a variable-*Q*_{10} response across the *T* range as described by two parameters; and (*vi*) a simple second-order polynomial model. Equations for these models are shown in *Supporting Information*. To compare how these models fit to data, we fitted each of the aforementioned models to all replicate *R–T* response curves in JMP (Version 11; SAS Institute), with parameters calculation controlled by the minimal residuals produced from each individual fit for each model. In cases where model convergence was not possible via the curve-fitting software, those replicate curves were not included to calculate mean residuals for the model fit over all replicates. Further, to evaluate the impact of different measurement temperature span (i.e., 10–45 °C vs. 20–45 °C) on model fits, we compared fit coefficients across all replicate curves at different segmented intervals of the response curve (Table S2, Fig. S3, and *Supporting Information*). Using these data, we also compared model fit coefficients from the approximate 20 °C *T* range that best represents the climate of that species (the “ecologically relevant” *T* range; Table S3 and *Supporting Information*) to the fit coefficients calculated from all available data from the entire measurement *T* range.

### Global Polynomial Model Calculation.

After polynomial curve fit analysis, each replicate curve could be defined by specific *a, b*, and *c* parameters. The mean value of replicates for individual species at given sites were calculated for *a, b*, and *c*, resulting in a total of 231 species-site means of these parameters used for our study. To create a “global model” of the *T* response of *R*, we calculated the mean of all 231 species-site mean values of the *a*, *b*, and *c* parameters.

### Modeling Site-Based Leaf *R* with JULES.

For our 18 field sites, we incorporated our derived global *T* response (Eq. **3**), with local values of *R*_{Tref}, into an offline version of Joint U.K. Land Environmental Simulator (JULES) to investigate the potential impacts of altered *T* sensitivity of *R*. JULES is the land-surface model of the U.K. Hadley Centre HadGEM (Hadley Centre Global Environment Model) family of global circulation models (28, 35). In its current form, JULES assumes that leaf *R* doubles for every 10 °C rise in *T* (i.e., *Q*_{10} = 2); other TBM frameworks have also assumed fixed *Q*_{10} [e.g., BIOME-BGC (36), PnET-CN (37) CLM4 (38), TEM (39)], or modified *Q*_{10} [e.g., BETHY (40)] functions. This is done using both the fixed *Q*_{10} and GPM formulations, and with JULES adopting the site-mean values leaf *R* at *R*_{Tref} = 25 °C derived from our short-term *T* response curves. The *Q*_{10} value is set as 2.0 for all 18 sites, and similarly for the GPM model, the *b* and *c* parameters are invariant, taking their cross-site means (Table 1 and Eq. **3**).

Here we use a version of JULES driven with the WATCH (water and global change) Forcing Data ERA-interim (WFDEI) surface climatology (41) for each of the 18 sites and for the period 2010–2014 inclusive. Each site uses the WFDEI gridded data values from its 0.5′ × 0.5′ grid resolution nearest to site location; and in time is therefore a subset of the WFDEI data, presently covering 1979–2014. The DGVM (Dynamic Global Vegetation Model) component of JULES is kept switched off, and therefore known local values of leaf area index (LAI) are prescribed. Four JULES PFTs were adopted (broadleaf trees, needleleaf trees, shrubs, and C_{3} grasses/herbs). With the DGVM off, then the main difference between these PFTs is the inclusion of deciduous phenology (where observed, affecting the prescribed LAI), and slightly different response curves for stomatal opening.

Our runs are made for each site, weighed by known fractional covers of the four PFTs above (predominantly broadleaf trees). The actual JULES model diagnostic presented (Fig. 3) is the canopy-top-level *R* value [μmol CO_{2} (m^{−2} of leaf cover)^{−1} s^{−1}), representing those fluxes that might be observed in fully sun-exposed leaves at the canopy crown, if fluxes from lower leaves were ignored.

## Materials and Methods

### Field Sites and Species.

Our 18 field sites (Table S1) cover extensive variation in climate and species diversity across four continents. The seven biomes represented across these sites are: arctic tundra (Tu), boreal forest (BF), temperate deciduous forest (TeDF), temperate woodland (TeW), temperate rainforest (TeRF), high-altitude tropical rainforest (TrRF_hi), and low-altitude tropical rainforest (TrRF_lw). At each site, a survey of representative woody tree and shrub (and in the Arctic tundra, herbaceous forb) species were selected for measurement. For comparison, these species were classified into the following broad plant functional groups that represent current classification groups in JULES: broadleaved deciduous temperate (BlDcTmp), broadleaved deciduous tropical (BlDcTrp), broadleaved evergreen temperate (BlEvTmp), broadleaved evergreen tropical (BlEvTrp), C_{3} herbaceous (C3H), needle-leaved evergreen (NlEv), and broadleaved evergreen shrubs (SEv). A full list of all 231 species included in this study can be found, grouped by site and biome, in Dataset S1.

### High-Resolution Measurements of the Temperature Response of Leaf Respiration.

At each field site, replicate branches of sunlit leaves were cut from plant species and either recut under water or placed in plastic bags containing moistened paper towels to minimize desiccation. Postsampling, all branches were recut again and kept in a water-filled bucket; all measurements occurred on the same day as branch sampling. For individual measurements, whole replicate leaves from these branches, or ∼10-cm shoot segments for conifers and small-leaved species, were placed in a *T*-controlled, well-mixed cuvette, and allowed to adapt to darkness for 30 min. Leaf cuvettes were *T* controlled via a thermostatically controlled circulating water bath (model F32-HL; JULABO Labortechnik GmbH) as in O’Sullivan et al. (27) and Heskel et al. (34), or via a Peltier system (3010-GWK1 Gas-Exchange Chamber, Walz, Heinz Walz GmbH). O’Sullivan et al. (27) used the same approach to measurement of *R*–*T* curves, found no differences between attached and detached leaves, and to allow for higher replication and species sampling, detached leaves were used for this study.

The exiting air stream from the cuvette was fed to the “sample” gas line and infrared gas analyzer of a portable gas exchange system (LI-6400xt; Li-Cor Inc.), allowing for instantaneous, continuous rates of CO_{2} efflux from the darkened leaves across the measurement *T* range. Rates of net exchange were calculated by comparing the “sample,” cuvette-based rates to those of the “reference” gas line. [CO_{2}] (set to the prevailing ambient concentration) and flow rate (700 μmol s^{−1}) of the air entering the cuvette chamber were controlled by the LI-6400XT console flow meter and 6400–01 CO_{2} mixer. Before entering the cuvette chamber, air was routed through the LI-6400XT desiccant column to control relative humidity inside the chamber.

After the 30-min dark adaption period, the cuvette chamber was cooled to 10 °C. Thereafter, the cuvette chamber was heated continuously at a rate of 1 °C min^{−1} until a maximum rate of respiration was reached (generally leaf *T* between 55 and 70 °C), although only data up to *T* = 45 °C was used in our model. Throughout the warming period, leaf *T* was continuously measured with a small-gauge wire chromel-constantan thermocouple pressed to the lower leaf surface in the cuvette chamber and attached to a LI-6400 external thermocouple adaptor (LI6400-13, Li-Cor Inc.), allowing for leaf *T* to be recorded by the LI-6400XT portable gas exchange system. Over the 10–45 °C range, leaves typically heated at a rate of 1 °C min^{−1} (i.e., matching the rate at which air *T* increased); however, at higher leaf *T*, the rate at which leaf *T* increased often slowed, reflecting an increase in evaporative loss of water from leaf surfaces. The net release of CO_{2} from leaves, as determined from the instantaneous difference between sample and reference lines, was recorded at 30s intervals, allowing for ∼ two measurements of *R* per 1 °C increase in *T*, resulting in a continuous, high-resolution *T* response of *R*.

Postmeasurement, each replicate leaf was removed from the cuvette, placed in a drying oven at ∼60 °C for a minimum of 2 d, and weighed afterward, so that rates could be expressed on a dry-mass basis (nmol CO_{2} g^{−1} s^{−1}). Because the measured replicate leaf often became highly desiccated to accurately measure leaf area, to determine area-based fluxes (μmol CO_{2} m^{−2} s^{−1}), a leaf of similar size and shape and adjacent to the measured leaf was digitally scanned (or determined with a leaf area meter; LI-3100 LiCor Inc.), dried, and weighed. The resulting leaf mass per unit area (LMA) of this adjacent leaf could then be used to calculate the area of the measured leaf (assuming a similar LMA) and the area-based *R* fluxes.

### Quantification of *R–T* Curves and Model Comparison.

The main objective of this study was to assess how leaf *R* responds to *T* experienced across their current environmental range within the growing season. For this reason, we limited the *T* range of replicate curves evaluated in this study to 10–45 °C. Though it is possible that *T* experienced by leaves may exceed this range, especially in arctic tundra and hot, arid woodland ecosystems, 10–45 °C approximately spans the mean *T* of the warmest quarter (i.e., warmest 3-mo period) for all sites presented in this study (Table S1).

Before analyzing *T* responses of *R* across biomes and plant functional types, we needed to determine which model would best describe the nuances of this response. Physiological model representations of plant respiratory *T* response can vary in their complexity and ability to account for observed biological patterns, such as decreases in the *T* sensitivity of *R* over increasing *T*s. For example, Arrhenius and fixed-*Q*_{10} exponential equations, which are widely used in many TBMs (6, 7) and feature little or no *T* sensitivity of the *R*–*T* response across biologically relevant *T* ranges. Thus, these models, and the UTD model (15) (which provides a nearly identical response as the Arrhenius) tend to overpredict *R* rates at low and high *T*s compared with observed *R* data (Dataset S1; Fig. 1). The Lloyd & Taylor (17) model contains a modified activation energy parameter to improve the representation of *R* in Arrhenius-based physiological models by allowing for a *T*-variable response. An *R–T* model presented by Tjoelker et al. integrates the *T* dependence of *R* more explicitly, which accounts for a predictable *T*-variable *Q*_{10} shared among species representing several diverse environments (16). To date, data available to rigorously test alternative empirical model fits were typically constrained by low resolution and a narrow range of measurement *T*s, and were further limited by species sample sizes when testing for biomes and PFTs differences. Generally, the inclusion of a *T*-variable *Q*_{10} to model the *T* response of *R* substantially improves predicted estimates of *R* (Fig. S1) compared with models that do not include this parameter (i.e., Arrhenius, UTD, exponential fixed-*Q*_{10}) and to models whose *T*-variable parameter effect is less pronounced (i.e., Lloyd & Taylor). Recent high-resolution *T*-response curves for a single species (27) were consistent with the general shape of the *T*-variable *Q*_{10} (5).

#### Exponential fixed-Q_{10}.

*R*_{Tref} is the rate of *R* at chosen reference *T* (*T*_{ref}, in degrees Centigrade) and *Q*_{10} is a fixed value.

#### Arrhenius.

*R*_{Tref} is the rate of *R* at chosen reference *T* (*T*_{ref}, in K), *Ea* is an activation energy and *r* is the gas law constant, 8.314 J mol^{−1} K^{−1}.

#### UTD.

*R*_{0} is the rate of *R* at 273K (T_{0}), *Ei* is an activation energy, and *k* is Boltzmann’s constant, 8.61733 × 10^{−5} eV K^{−1}.

#### Lloyd & Taylor.

*R* _{Tref} is the rate of *R* at chosen reference *T* (*T*_{ref}), *Eo* is an activation energy, and *T*_{0}, which is a temperature between *T* and 0K.

#### Variable-Q_{10}.

*R* _{Tref} is the rate of *R* at chosen reference *T* (*T*_{ref}), and *x* and *y* are constants that describe the temperature dependence of *Q*_{10}. Finally, the polynomial model (Eq. **1**), where *a*, *b*, and *c* are fit coefficients from the second-order polynomial applied to *ln*-transformed *R*.

Over all of the replicates available, we assessed the mean residuals produced from each model at each *T*, from 10 to 45 °C (Fig. S2*A*). The Arrhenius model and UTD models produced identical fits, due to their similar structure and use of a single activation energy value; for this reason, we treat their response as identical for comparisons (Fig. S2*A*). We found a pronounced difference between models that included a *T*-dependent parameter or allowed for *T* sensitivity of the *T* response (variable-*Q*_{10}, polynomial, and to a lesser degree Lloyd & Taylor), and models that did not (exponential fixed-*Q*_{10}, Arrhenius/UTD), mainly in their ability to fit *R* at low *T*s. Overall, the models that allowed for the most *T* sensitivity—the variable-*Q*_{10} and the polynomial—provided the lowest mean residuals considering all *T*s. These results were also seen when fitting all models to the mean *R* response of individual biomes and plant functional type groups, as well as with the mean *R* response of all species. Between the variable-*Q*_{10} and polynomial models, the polynomial model is further removed from the dependence on the concept of *Q*_{10} formulation, which can be problematic in applying in larger biosphere models, and further, it does not rely on biologically based assumptions of activation energies. For these reasons we selected to use the polynomial model when comparing the global database of *R–T* response curves.

Thus, based on the results of model comparison between the commonly applied *R–T* model functions on all replicates, we confirmed results found in O’Sullivan et al. (27) that a second-order polynomial can best represent how *R* (here, log transformed) responds to *T* between 10 and 45 °C. The polynomial fit of the replicate *T* response curves (Eq. **1**) provides three coefficients: *a*, the *y* axis intercept; *b*, the value of the slope when *T* = 0 °C; and *c*, which determines the decline in the slope (i.e., curvature) with increasing measuring *T*. Thus, each replicate fitted *T*-response curve provides a specific *a*, *b*, and *c* value.

### Tests for Normality and Outlier Removal.

The total number of *T* response curves of *R* originally collected across all field campaigns was 787, though ∼40 measured replicate curves were not included in initial analysis due to measurement error caused by instability of the measurement equipment under hot conditions. Replicate measurements were removed from the remaining dataset before analysis when values of *R* at 25 °C (area and mass based), and values of *Q*_{10} at 25 and 10 °C were found to be greater or less than 2 times the interquartile range of all values (values were log transformed for normality when necessary). Following that filter for outliers, replicates where values of *b* and *c* exceeded more than 2 times the interquartile range of all remaining values were removed. The final dataset consisted of 673 replicate measured *R* temperature-response curves resulting in a total of 231 individual species-site means, which were used for data analysis.

### Segmented Interval Analysis.

Our study aimed to compare the *T* response of *R*, measured at high resolution between 10 and 45 °C across species representing diverse ecosystems and plant forms and functional types. Collecting these response curves under field conditions can sometimes restrict the minimum *T* reached before curve measurement initiation due to limitations in the ability of the Peltier cooling system of the leaf cuvette to reach 10 °C, especially in hot climates. Although the rate of warming and reaching of high temperatures were not restricted by the field-site environmental conditions, the starting *T* was often ∼5 °C above 10 °C for measurements made at the hotter sites. For this reason, there is some variability in the low, starting *T* of replicate curves.

The variation in starting *T* values between curves posed a potential issue when comparing curves of different ranges (i.e., 10–45 °C, 17–45 °C, 24–45 °C, etc.), and their resulting *a*, *b*, and *c* parameters. To address this issue, we performed a segmented interval analysis, wherein each replicate curve was divided into 20 °C length segments (10–30 °C, 15–35 ^{o}C, 20–40 °C, and 25–45 °C) and a polynomial fit was applied to each segment (Fig. S3). The values of *a*, *b*, and *c* derived from each segmented interval where then compared with each other and the *a*, *b*, and *c* values derived from the original, full-length, nonsegmented curve that included the maximum amount of data (Table S2). A mixed-model analysis, which accounted for the unbalanced dataset and potential random effects of Biome and PFT, indicated that none of the parameter values derived from the distinct, 20 °C segments differed significantly from the parameter values from response curves that contained all data available (Table S2). Although there was some variation between distinct segmented intervals, the lack of significance between any segment and the full length curve supported our use of the full curves, as they provided the most information for a given replicate without compromising comparisons between curves of different lengths.

### Ecologically Relevant Parameters.

In addition to the full measured *T* range (10–45 °C), we also calculated polynomial parameters *a*, *b*, and *c*, for an ecologically relevant *T* range—a 20 °C span centered around the mean *T* value of the warmest quarter at the sampling site, which represents an approximation of growing season *T* range. The parameters for the ecologically relevant *T* range (Table S3) follow similar patterns in variation among intercept values (*a*) as those calculated using the full *T* range, and maintain no difference in *b* and *c* between biome or PFT groups, suggesting the fundamental response curve shape is unaffected by measurement *T* range. Thus, despite differences among biomes and PFTs in the offset, the shared shape and curvature of the response of *R* to *T*, as defined by the *b* and *c* model parameters, did not differ significantly, whether over the full *T* range or the ecologically relevant *T* range (Tables 1 and S3).

### Parameterizing JULES for Modeling Leaf *R*.

The JULES model is the land-surface description for the current U.K. Hadley Centre HadGEM family of global circulation models (28). Two key requirements placed on the model are to determine the split of surface available energy into sensible and latent heat fluxes, and to calculate terrestrial carbon cycling and thus the role of ecosystems in the changing global carbon cycle. The two calculations are coupled, as in one configuration JULES can operate with a dynamic global vegetation model (DGVM) component; top-down representation of interactive foliage and flora including dynamics (TRIFFID) (28, 44). Climatically induced changes to leaf components such as stomatal opening can alter net primary productivity, which in turn can feedback on energy partitioning via DGVM projections of altered LAI.

The JULES model is also available independent of a GCM, and as a fully offline description of terrestrial response. Our descriptions of leaf *R* could be modeled completely independent of any land-surface model, if leaf-level temperature is known throughout our years of interest. In general this quantity is unavailable, and so the main purpose of our JULES simulations is to generate leaf *T* values resulting from the WFDEI-based estimated mean screen-level meteorological conditions (41). Leaf level *T* is a diagnostic from the JULES solution to the surface energy balance, a consequence of solution to a form of the Penman–Monteith equation (45). This value will depend on parameters set, including LAI (28). In our configuration, as LAI is known at each site, this value is prescribed although it is allowed to change as the model is extrapolated to other seasons to capture phenology on leaf cover—hence the “dynamic” component of TRIFFID is overridden.

Further, in other applications of JULES, leaf *R* varies through the canopy, and then the energy balance will create different leaf *T* values through the canopy due to changing light levels. As we are interested in leaf-level response of fully sun exposed leaves, for this run we ignore intracanopy variability in the resulting *R* values. That is, a “tree” of LAI of unity, and with no self-shading. The exception to this is inclusion of phenology, where we normalized leaf *R* by LAI(t)/LAI_{M}, where *t* is time, LAI(*t*) is modeled LAI based only on phenological changes, and LAI_{M} is maximum, prescribed LAI.

## Acknowledgments

This work was funded by the Australian Research Council Grants/Fellowships DP0986823, DP130101252, CE140100008, and FT0991448 (to O.K.A.), FT110100457 (to P.M.), and DP140103415 (to M.G.T.); Natural Environment Research Council (UK) Grant NE/F002149/1 (to P.M.); Award DE-FG02-07ER64456 from the US Department of Energy, Office of Science, Office of Biological and Environmental Research (to P.B.R.); and National Science Foundation International Polar Year Grant (to K.L.G.). A.M.-d.l.T., and C.H. acknowledge the Centre for Ecology and Hydrology (UK) National Capability fund.

## Footnotes

- ↵
^{1}To whom correspondence should be addressed. Email: Owen.Atkin{at}anu.edu.au.

Author contributions: M.A.H., O.S.O., M.G.T., and O.K.A. designed research; M.A.H., O.S.O., M.G.T., L.K.W., A.P., J.J.G.E., D.C., K.J.B., J.X., F.S., Z.R.S., A.M.-d.l.T., K.L.G., C.H., V.H., M.H.T., and O.K.A. performed research; M.A.H., O.S.O., P.B.R., M.G.T., L.K.W., A.P., J.J.G.E., D.C., K.J.B., J.X., A.M.-d.l.T., K.L.G., C.H., V.H., P.M., M.H.T., and O.K.A. analyzed data; and M.A.H., O.S.O., P.B.R., M.G.T., A.M.-d.l.T., C.H., and O.K.A. wrote the paper.

The authors declare no conflict of interest.

This article is a PNAS Direct Submission.

This article contains supporting information online at www.pnas.org/lookup/suppl/doi:10.1073/pnas.1520282113/-/DCSupplemental.

## References

- ↵.
- Canadell JG, et al.

_{2}growth from economic activity, carbon intensity, and efficiency of natural sinks. Proc Natl Acad Sci USA 104(47):18866–18870 - ↵IPCC (2013).
*Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change*, eds Stocker TF, et al. (Cambridge University Press, Cambridge, UK) - ↵
- ↵.
- Amthor JS

- ↵
- ↵.
- King AW,
- Gunderson CA,
- Post WM,
- Weston DJ,
- Wullschleger SD

- ↵
- ↵
- ↵
- ↵
- ↵
- ↵.
- Lambers H,
- Ribas-Carbo M

- Atkin OK,
- Bruhn D,
- Tjoelker MG

_{10}; Values and Acclimation. Plant Respiration, Advances in Photosynthesis and Respiration, eds Lambers H, Ribas-Carbo M (Springer, Dordrecht, The Netherlands), Vol 18, pp 95–135 - ↵.
- Blackman FF,
- Matthaei GL

- ↵
- ↵.
- Gillooly JF,
- Brown JH,
- West GB,
- Savage VM,
- Charnov EL

- ↵
- ↵
- ↵.
- Amthor JS

- ↵
- ↵.
- James WO

- ↵.
- Mahecha MD, et al.

- ↵.
- Zaragoza-Castells J, et al.

- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵
- ↵.
- Bonan GB, et al.

- ↵
- ↵
- ↵
- ↵
- ↵.
- Cox P

- ↵
- ↵

## Citation Manager Formats

## Sign up for Article Alerts

## Article Classifications

- Biological Sciences
- Ecology